DUAL J - K FLIP FLOP WITH CLEAR

Dual J-K Flip Flop with Clear The TC74HC107A is a high speed CMOS DUAL J-K FLIP FLOP fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. In accordance with the logic levels applied to t

文件：281.08 Kbytes 页数：7 Pages

TOSHIBA

东芝

CMOS Digital Integrated Circuit Silicon Monolithic Dual J-K Flip Flop with Clear

文件：300.72 Kbytes 页数：9 Pages

TOSHIBA

东芝

74HC CMOS logic IC series

Function：Dual J-K Flip-Flop with Clear\nNumber of Circuits：2\nRoHS Compatible Product(s) (#)：Available\nAssembly bases：日本

Toshiba

东芝

Dual JK flip-flop with reset; negative-edge trigger

GENERAL DESCRIPTION The 74HC/HCT107 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT107 are dual negative-edge triggered JK-type flip-flops featuring individual J, K, cloc

文件：53.67 Kbytes 页数：7 Pages

PHI

飞利浦

Dual JK flip-flop with reset; negative-edge trigger

1. General description The 74HC107; 74HCT107 is a dual negative edge triggered JK flip-flop featuring individual J and K inputs, clock (CP) and reset (R) inputs and complementary Q and Q outputs. The reset is an asynchronous active LOW input and operates independently of the clock input. The J

文件：259.73 Kbytes 页数：15 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

Dual JK flip-flop with reset; negative-edge trigger

GENERAL DESCRIPTION The 74HC/HCT107 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT107 are dual negative-edge triggered JK-type flip-flops featuring individual J, K, cloc

文件：53.67 Kbytes 页数：7 Pages

PHI

飞利浦