STLUX285A中文资料Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI数据手册ST规格书

描述 Description

The STLUX™ family of controllers is a part of the STMicroelectronics®digital devices tailored for lighting and power conversion applications. The STLUX controllers have been successfully integrated in a wide range of architectures and applications, starting from simple buck converters for driving multiple LED strings, boost for power factor corrections, half-bridge resonant converters for high power dimmable LED strings and up to full bridge controllers for HID lamp ballasts.

特性 Features

• Up to 6 programmable PWM generators (SMEDs - “State Machine Event Driven”)
• 10 ns event detection and reaction
• Max.1.3 ns PWM resolution
• Single, coupled and two coupled operational modes
• Up to 3 internal/external events per SMED
• DALI (digital addressable lighting interface)
• Interrupt driven hardware encoder
• Bus frequency: 1.2, 2.4 or 4.8 kHz
• IEC 60929 and IEC 62386 compliant plus 24-bit frame extension
• Configurable noise rejection filter
• Reverse polarity on Tx/Rx lines
• 4 analog comparators
• 4 internal 4-bit references
• 1 external reference
• Less than 50 ns propagation time
• Continuous comparison cycle
• ADCs (up to 8 channels)
• 10-bit precision, with operational amplifier to extend resolution to 12-bit equivalent
• Sequencer functionality
• Input impedance: 1 MΩ
• Configurable gain value: x1 and x4
• Integrated microcontroller
• Advanced STM8®core with Harvard architecture and 3-stage pipeline
• Max. fCPU: 16 MHz
• Multiple low power modes
• Memories
• Flash and E2PROM with read while write (RWW) and error correction code (ECC)
• Program memory: 32 Kbytes Flash; data retention 15 years at 85 °C after 10 kcycles at 25 °C
• Data memory: 1 Kbyte true data E2PROM; data retention:15 years at 85 °C after 100 kcycles at 85 °C
• RAM: 2 Kbytes
• Clock management
• Internal 96 MHz PLL
• Low power oscillator circuit for external crystal resonator or direct clock input
• Internal, user-trimmable 16 MHz RC and low power 153.6 kHz RC oscillators
• Clock security system with clock monitor
• Basic peripherals
• System and auxiliary timers
• IWDG/WWDG watchdog, AWU, ITC
• I/O
• GPIO with highly robust design, immune against current injection
• Fast digital input DIGIN, with configurable pull-up
• Communication interfaces
• UART asynchronous with SW flow control and boot loader support
• I2C master/slave fast-slow speed rate
• Operating temperature: -40 °C up to 105 °C

简介

STLUX285A属于集成电路（IC）的电源管理-专用。由制造生产的STLUX285A电源管理 - 专用专用型电源管理集成电路 (PMIC) 用于电源的控制或操作，适合特定或小范围的目标应用，例如汽车气囊管理、电容器组平衡、AC 公共电力监控、存储器总线端接、接地故障检测、能量收集、小型引擎管理、处理器或芯片集专用电压调节、负载突降保护、触觉驱动器、热电制冷器控制等。