SSD1608中文资料点阵双稳态显示驱动IC数据手册Solomon规格书

描述 Description

The SSD1608 is a CMOS active matrix bistable display driver with controller.  It consists of 240 source outputs, 320 gate outputs, 1 VCOM and 1 VBD for border that can support a maximum display resolution 240x320 for single chip application.  In addition, the SSD1608 has a cascade mode that can support higher display resolution.
The SSD1608 embeds booster, regulators and oscillator.  Data/Commands are sent from general MCU through the hardware selectable 6800-/8080-series compatible Parallel Interface or Serial Peripheral Interface.

特性 Features

·Design for dot matrix type active matrix EPD display
·Resolution: 240 source outputs; 320 gate outputs; 1 VCOM; 1VBD for border
·Power supply
- VCI: 2.4 to 3.7V
- VDDIO: Connect to VCI
- VDD: 1.8V, regulate from VCI supply
·Gate driving output voltage:
- 2 levels output (VGH, VGL)
- Max 42Vp-p
- VGH: 15V to 22V;
- VGL: -20V to -15V
- Voltage adjustment in steps of 500mV
·Source / VBD driving output voltage:
- 3 levels output (VSH, VSS, VSL)
- VSH: 10V to 17V
- VSL: -10V to -17V
- Voltage adjustment in steps of 500mV
·VCOM output voltage
- -4V to -0.2V in 20mV resolution
- 8 bits Non-volatile memory (OTP) for VCOM adjustment
·Source and gate scan direction control
·Low current deep sleep mode
·On chip display RAM with double display buffer [240x320 / 8 * 2 = 19200Byte]
·Waveform settings can be programmed and stored in On-chip OTP
·Programmable output waveform allowing flexibility for different applications / environments.
·Built in VCOM sensing
·On-chip oscillator.
·On-chip booster and regulator control for generating VCOM, Gate and Source driving voltage.
·Cascade mode to support higher display resolution.
·I2C Single Master Interface to read external temperature sensor reading
·8-bits Parallel (6800 & 8080), Serial peripheral interface available
·Available in COG package