SSD1310中文资料OLED显示驱动器IC数据手册Solomon规格书

描述 Description

160 x 72, Dot Matrix OLED/PLEDSegment/Common Driver with Controller
SSD1310 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. It consists of 160 segments and 72 commons. This IC is designed for Common Cathode type OLED/PLED panel.
SSD1310 displays data directly from its internal 160 x 72 bits Graphic Display Data RAM (GDDRAM). Data/Commands are sent from general MCU through the hardware selectable I2C Interface, 6800-/8080-series compatible Parallel Interface or Serial Peripheral Interface.The 256 steps contrast control and oscillator which embedded in SSD1310 reduces the number of external components. SSD1310 is suitable for portable applications requiring a compact size and high output brightness, such as set-top box, car audio, wearable electronics, etc.

特性 Features

·Resolution: 160 x 72 dot matrix panel
·Power supply

• VDD = 1.65V – 3.5V, ≤ VBAT (for IC logic)
• VBAT = 3.0V – 4.7V (for charge bump regulator circuit)

• VCC = 7V – 18V (for Panel driving)
·Segment maximum source current: 480uA
·Common maximum sink current: 76.8mA
·Embedded 160 x 72 bit SRAM display buffer
·Pin selectable MCU Interfaces:
• 8 bits 6800/8080-series parallel Interface
• 3/4 wire Serial Peripheral Interface
• I2C Interface
·Screen saving continuous scrolling function in both horizontal and vertical direction
·Screen saving infinite content scrolling function
·Internal or external IREF selection
·Internal charge pump regulator
·RAM write synchronization signal
·Programmable Frame Rate and Multiplexing Ratio
·Row Re-mapping and Column Re-mapping
·Portrait Addressing Mode
·Power On Reset (POR)
·Dynamic Grayscale
·On-Chip Oscillator
·Chip layout for COG, COF
·Wide range of operating temperature: -40C to 85C