SSD1351中文资料OLED显示驱动器IC数据手册Solomon规格书

描述 Description

The SSD1351 is a CMOS OLED/PLED driver with 384 segments and 128 commons output, supporting up to 128RGB x 128 dot matrix display. This chip is designed for Common Cathode type OLED/PLED panel.
The SSD1351 has embedded Graphic Display Data RAM (GDDRAM). It supports with 8, 16, 18 bits 8080 / 6800 parallel interface, Serial Peripheral Interface. It has 256-step contrast and 262K color control, giving vivid color display on OLED panels.

特性 Features

·Resolution: 128RGB x 128 dot matrix panel
·262k color depth supported by embedded 128x128x18 bit SRAM display buffer
·Power supply
- VDDIO= 1.65V - VCI (MCU interface logic level)
- VCI= 2.4V - 3.5V (Low voltage power supply)
- VCC= 10.0V - 18.0V (Panel driving power supply)
·Segment maximum source current: 200µA
·Common maximum sink current: 70mA
·256 step brightness current control for the each color component plus 16 step master current control
·Pin selectable MCU Interfaces:
- 8/16/18 bits 6800-series parallel interface
- 8/16/18 bits 8080-series parallel interface
- 3-wire and 4-wire Serial Peripheral Interface
·Support various color depths
- 262k color (6:6:6)
- 65k color (5:6:5)
·Gamma Look Up Tables (GLUT) with 8 bit entry
·Row re-mapping and Column re-mapping
·Vertical and horizontal scrolling
·Programmable Frame Rate and Multiplexing Ratio
·On-chip Oscillator
·Color Swapping Function (RGB-BGR), arranged in RGB sequence when reset
·Slim chip layout for COF
·Operating temperature range -40ºC to 85ºC