SMJ320C40中文资料军用级 C40 浮点 DSP - 陶瓷封装数据手册TI规格书

描述 Description

The C40 digital signal processors (DSPs) are 32-bit, floating-point processors manufactured in 0.72-um, double-level metal CMOS technology. The 320C40 is a part of the fourth-generation DSPs from Texas Instruments and is designed primarily for parallel processing. For additional information when designing for cold temperature operation, please see Texas Instruments application report 320C3x, 320C4x and 320MCM42x Power-up Sensitivity at Cold Temperature, literature number SGUA001.

特性 Features

• SMJ: QML Processing to MIL-PRF-38535
• TMP: Commercial Level Processing TAB
• Military (M) -55°C to 125°C
• Commercial (C) -25°C to 85°C
• Highest Performance Floating-Point Digital Signal Processor (DSP)
• C40-50:
• C40-40:
• Six Communications Ports
• Single-Cycle Conversion to and From IEEE-745 Floating-Point Format
• Source-Code Compatible With SMJ320C30
• Single-Cycle 40-Bit Floating-Point, 32-Bit Integer Multipliers
• IEEE Standard 1149.1 Test-Access Port (JTAG)
• High Port-Data Rate of 100 MBytes/s (Each Bus)
• Memory-Access Request for Fast, Intelligent Bus Arbitration
• Four Sets of Memory-Control Signals Support Different Speed Memories in Hardware
• Packaging:
• 352-Lead Ceramic Quad Flatpack (HFH Suffix)
• Fabricated Using Enhanced Performance Implanted CMOS (EPIC™) Technology by Texas Instruments (TI™)
• On-Chip Program Cache and Dual-Access/Single-Cycle RAM for Increased Memory-Access Performance
• 8K Bytes of Single-Cycle Dual-Access Program or Data RAM
• ROM-Based Bootloader Supports Program Bootup Using 8-, 16-, or 32-Bit Memories Over Any One of the Communications Ports

IEEE Standard 1149.1- 1990, IEEE Standard Test-Access Port and Boundary-Scan Architecture. EPIC and TI are trademarks of Texas Instruments Incorporated.