SKY77661-11数据手册RF/IF射频/中频RFID的射频放大器规格书PDF

描述 Description

The SKY77661-11 is a hybrid, multimode multiband (MMMB) Power Amplifier Module (PAM) that supports 2.5G and 3G/4G handsets and operates efficiently in GSM, EGPRS, EDGE, WCDMA, and LTE modes. The PAM consists of a GSM 800/EGSM 900 PA block, a DCS1800/PCS1900 PA block, separate WCDMA blocks operating in low and high bands, a logic control block for multiple power control levels, and band enable functions in both cellular and UMTS. RF I/O ports are internally matched to 50 \u001E to minimize the number of external components. Extremely low leakage current maximizes handset standby time. The InGaP/GaAs die and passive components are mounted on a multi-layer laminate substrate and the assembly encapsulated in plastic overmold.

GSM/ EDGE (Dual Mode): The SKY77661-11 uses a new compact architecture supporting the GSM850, EGSM900, DCS1800 and PCS1900 bands. The PAM also supports 2.5G Class 12 Enhanced General Packet Radio Service (EGPRS) multi-slot operation and EDGE linear modulation.

VRAMP MODE: In GMSK modes, the PA controller provides envelope amplitude control as a function of VRAMP and reduces sensitivity to input drive, temperature, power supply, and process variation. Skyworks' Finger-based Integrated Power Amplifier Control (FB-iPAQ) minimizes output power variation into mismatch.

In EDGE modes, VRAMP voltage and MIPI-based bias settings optimize PA linearity and efficiency.

WCDMA: The SKY77661-11 uses enhanced architecture to support WCDMA, High-Speed Downlink Packet Access (HSDPA), High-Speed Uplink Packet Access (HSUPA) and LTE modulations; cover multiple bands for 3GPP, including bands 1, 2, 4, 5 and 8 and operate at different power modes. The module is fully controlled through MIPI interface.

TD-SCDMA/TDD LTE: The SKY77661-11 uses an enhanced architecture that supports TD-SCDMA bands 34/39 and TDD LTE band 39.

LTE: The SKY77661-11 meets spectral linearity requirements of LTE modulation with QPSK/16QAM up to 20 MHz bandwidth, including various resource block allocations, with good power-added efficiency.

特性 Features

• Hybrid architecture: separate GSM, WCDMA paths
• 50 ohm input and output impedances, integrated DC blocking on all ports
• Separate single-ended GSM and WCDMA inputs and outputs
• CMOS-compatible, two-wire MIPI logic inputs (SCLK, SDATA)
• VCC stages for 2.5G can attach to battery or buck DC/DC
• Small, low profile package: 7 mm x 4 mm x 0.8 mm, 44-pad configuration
• 2.5G FEATURES:
• EGPRS Class 12 multi-slot operation
• Four RF POUT control levels using RFFE interface
• Linear PA with bias optimization for efficiency/linearity trade-off in 8-PSK mode
• Dual mode GSM PA with VRAMP for efficiency/linearity trade off in 8-PSK mode

应用 Application

• Smartphones
• 4G LTE

简介

SKY77661-11属于RF/IF射频/中频RFID的射频放大器。由制造生产的SKY77661-11射频放大器在射频应用中，射频放大器产品可用于信号增益和缓冲。这些产品与通用运算放大器的不同之处在于，它们通常适用于更高的频率，更倾向于提供不可调节的固定增益，并且输入或输出阻抗值符合常用传输线特性阻抗。