Quad UART for 3.3V and 5V supply voltage

DESCRIPTION The Philips 28L194 Quad UART is a single chip CMOS-LSI communications device that provides 4 full-duplex asynchronous channels with significantly deeper 16 byte FIFOs, Automatic in-band flow control using Xon/Xoff characters defined by the user and address recognition in the Wake-up m

文件：294.08 Kbytes 页数：52 Pages

PHI

飞利浦

Quad UART for 3.3V and 5V supply voltage

DESCRIPTION The Philips 28L194 Quad UART is a single chip CMOS-LSI communications device that provides 4 full-duplex asynchronous channels with significantly deeper 16 byte FIFOs, Automatic in-band flow control using Xon/Xoff characters defined by the user and address recognition in the Wake-up m

文件：294.08 Kbytes 页数：52 Pages

PHI

飞利浦

Quad UART for 3.3V and 5V supply voltage

DESCRIPTION The Philips 28L194 Quad UART is a single chip CMOS-LSI communications device that provides 4 full-duplex asynchronous channels with significantly deeper 16 byte FIFOs, Automatic in-band flow control using Xon/Xoff characters defined by the user and address recognition in the Wake-up m

文件：294.08 Kbytes 页数：52 Pages

PHI

飞利浦

Quad UART for 3.3 V and 5 V supply voltage

The Philips 28L194 Quad UART is a single chip CMOS-LSI communications device that provides 4 full-duplex asynchronous channels with significantly deeper 16 byte FIFOs, Automatic in-band flow control using Xon/Xoff characters defined by the user and address recognition in the Wake-up mode. Synchronou Single 3.3V and 5.0V power supply\nFour Philips industry standard full duplex UART channels\nSixteen byte receiver FIFOs for each UART\nSixteen byte transmit FIFOs for each UART\nIn band flow control using programmable Xon/Xoff characters\nFlow control using CTSN RTSN hardware handshaking\nAutomatic;

恩XP

Quad UART for 3.3 V and 5 V supply voltage

The Philips 28L194 Quad UART is a single chip CMOS-LSI communications device that provides 4 full-duplex asynchronous channels with significantly deeper 16 byte FIFOs, Automatic in-band flow control using Xon/Xoff characters defined by the user and address recognition in the Wake-up mode. Synchronou Single 3.3V and 5.0V power supply\nFour Philips industry standard full duplex UART channels\nSixteen byte receiver FIFOs for each UART\nSixteen byte transmit FIFOs for each UART\nIn band flow control using programmable Xon/Xoff characters\nFlow control using CTSN RTSN hardware handshaking\nAutomatic;

恩XP