Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFO

文件：598.02 Kbytes 页数：45 Pages

PHI

飞利浦

5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs

The SC16C750B is a Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data, and vice versa. The UART can handle serial data rates up to 3 Mbit/s.\nThe SC16C750B is pin compatible with the TL16C750 Single channel\n5 V, 3.3 V and 2.5 V operation\n5 V tolerant on input only pins\nIndustrial temperature range (-40 Cel to +85 Cel)\nAfter reset, all registers are identical to the typical 16C450 register set\nCapable of running with all existing generic 16C450 software\nPin compatibility with the in;

恩XP

恩智浦

5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs

The SC16C750B is a Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data, and vice versa. The UART can handle serial data rates up to 3 Mbit/s.\nThe SC16C750B is pin compatible with the TL16C750 Single channel\n5 V, 3.3 V and 2.5 V operation\n5 V tolerant on input only pins\nIndustrial temperature range (-40 Cel to +85 Cel)\nAfter reset, all registers are identical to the typical 16C450 register set\nCapable of running with all existing generic 16C450 software\nPin compatibility with the in;

恩XP

恩智浦

SC16C750IA44

Overview

恩XP

恩智浦