5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs

文件：216.9 Kbytes 页数：44 Pages

PHI

飞利浦

5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs

文件：222.32 Kbytes 页数：44 Pages

恩XP

5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs

The SC16C750B is a Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data, and vice versa. The UART can handle serial data rates up to 3 Mbit/s.\nThe SC16C750B is pin compatible with the TL16C750 Single channel\n5 V, 3.3 V and 2.5 V operation\n5 V tolerant on input only pins\nIndustrial temperature range (-40 Cel to +85 Cel)\nAfter reset, all registers are identical to the typical 16C450 register set\nCapable of running with all existing generic 16C450 software\nPin compatibility with the in;

恩XP

恩智浦

ASYNCHRONOUS COMMUNICATIONS ELEMENT WITH 64-BYTE FIFOs AND AUTOFLOW CONTROL

文件：511.85 Kbytes 页数：35 Pages

TI

德州仪器

ASYNCHRONOUS COMMUNICATIONS ELEMENT WITH 64-BYTE FIFOs AND AUTOFLOW CONTROL

Pin-to-Pin Compatible With the Existing TL16C550B/C Programmable 16- or 64-Byte FIFOs to Reduce CPU Interrupts Programmable Auto-RTS and Auto-CTS In Auto-CTS Mode, CTS Controls Transmitter In Auto-RTS Mode, Receiver FIFO Contents and Threshold Control RTS Serial and Modem Control Outputs

文件：575.9 Kbytes 页数：38 Pages

TI

德州仪器

TL16C750E UART with 128-Byte FIFO

文件：1.0367 Mbytes 页数：59 Pages

TI

德州仪器