5.0 thru 170 volts 500 Watts Transient Voltage Suppressors

DESCRIPTION: This Transient Voltage Suppressor is an economical, molded, commercial product used to protect voltage sensitive components from destruction or partial degradation. The response time of their clamping action is virtually instantaneous (1 x 10-12 seconds) and they have a peak pulse po

文件：77.98 Kbytes 页数：5 Pages

MICROSEMI

美高森美

Transient Voltage Suppressors

Features • Glass passivated junction. • 500W Peak Pulse Power capability on 10/1000 µs waveform. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical

文件：85.09 Kbytes 页数：4 Pages

FAIRCHILD

仙童半导体

500W TRANSIENT VOLTAGE SUPPRESSOR

Features • Constructed with Glass Passivated Die • Excellent Clamping Capability • 500W Peak Pulse Power Dissipation • Fast Response Time • 100 Tested at Rated Peak Pulse Power • Voltage Range 5.0 - 170 Volts • Unidirectional and Bi-directional Versions Available (Note 1) • Available in Le

文件：202.73 Kbytes 页数：4 Pages

DIODES

美台半导体

5.0V to 170V GPP TRANSIENT VOLTAGE SUPPRESSORS

Features ■ 500 WATT PEAK POWER PROTECTION ■ EXCELLENT CLAMPING CAPABILITY ■ FAST RESPONSE TIME ■ TYPICAL IR

文件：178.15 Kbytes 页数：4 Pages

FCI

富加宜

Transient Voltage Suppressors

Peak Pulse Power 500W Stand Off Voltage 5.0 to 180V Features ◆ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◆ Glass passivated junction ◆ Excellent clamping capability ◆ Low incremental surge resistance ◆ Very fast response time ◆ 500W peak pulse power s

文件：410.94 Kbytes 页数：6 Pages

GOOD-ARK

固锝电子

Silicon Avalanche Diodes - 500 Watt Axial Leaded Transient Voltage Suppressors

Description The SA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • 500W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01 • VBR @ TJ= VBR@25°C

文件：126.22 Kbytes 页数：4 Pages

LITTELFUSE

力特

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts

VOLTAGE - 5.0 TO 170 Volts 500Watt Peak Power 3.0 Watt Steady State Feature * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-15 package * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedan

文件：189.61 Kbytes 页数：9 Pages

LRC

乐山无线电

500WATTS TRANSIENT VOLTAGE SUPPRESSOR 5.0 TO 170 VOLTS

Features • Glass passivated chip • Low leakage • Uni and Bidirectional unit • Excellent clamping capability • the plastic material has U/L recognition 94V-O • Fast response time

文件：431.67 Kbytes 页数：6 Pages

MCC

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 180.0 Volts 500 Watt Peak Pulse Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated junction • 500W Peak Pulse Power capability on 10/1000 µs waveform • Glass passivated junction • Low incremental surge re

文件：63.1 Kbytes 页数：3 Pages

MDE

MOSORB ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS

The SA5.0A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SA5.0A series is supplied in Motorola’s exclusive, cost-effective, highly

文件：50.68 Kbytes 页数：3 Pages

MOTOROLA

摩托罗拉