S3C4510B中文资料三星数据手册PDF规格书

OVERVIEW

Samsungs S3C4510B 16/32-bit RISC microcontroller is a cost-effective, high-performance microcontroller solution for Ethernet-based systems. An integrated Ethernet controller, the S3C4510B, is designed for use in managed communication hubs and routers.

The S3C4510B is built around an outstanding CPU core: the 16/32-bit ARM7TDMI RISC processor designed by Advanced RISC Machines, Ltd. The ARM7TDMI core is a low-power, general purpose microprocessor macro-cell that was developed for use in application-specific and custom-specific integrated circuits. Its simple, elegant, and fully static design is particularly suitable for cost-sensitive and power-sensitive applications.

The S3C4510B offers a configurable 8K-byte unified cache/SRAM and Ethernet controller which reduces total system cost. Most of the on-chip function blocks have been designed using an HDL synthesizer and the S3C4510B has been fully verified in Samsungs state-of-the-art ASIC test environment.

Important peripheral functions include two HDLC channels with buffer descriptor, two UART channels, 2-channel GDMA, two 32-bit timers, and 18 programmable I/O ports. On-board logic includes an interrupt controller, DRAM/SDRAM controller, and a controller for ROM/SRAM and flash memory. The System Manager includes an internal 32-bit system bus arbiter and an external memory controller.

The following integrated on-chip functions are described in detail in this users manual:

— 8K-byte unified cache/SRAM

— I2C interface

— Ethernet controller

— HDLC

— GDMA

— UART

— Timers

— Programmable I/O ports

— Interrupt controller

FEATURES

Architecture

• Integrated system for embedded ethernet applications

• Fully 16/32-bit RISC architecture

• Little/Big-Endian mode supported basically, the internal architecture is big-endian. So, the little-endian mode only support for external memory.

• Efficient and powerful ARM7TDMI core

• Cost-effective JTAG-based debug solution

• Boundary scan

System Manager

• 8/16/32-bit external bus support for ROM/SRAM, flash memory, DRAM, and external I/O

• One external bus master with bus request/ acknowledge pins

• Support for EDO/normal or SDRAM

• Programmable access cycle (0-7 wait cycles)

• Four-word depth write buffer

• Cost-effective memory-to-peripheral DMA interface (Continue...)