RTL8211E/EG中文资料Integrated 10/100/1000 Gigabit Ethernet Transceiver数据手册Realtek规格书

描述 Description

The Realtek RTL8211E-CG/RTL8211EG-CG is a highly integrated Ethernet transceiver that complies with 10Base-T, 100Base-TX, and 1000Base-T IEEE 802.3 standards. It provides all the necessary physical layer functions to transmit and receive Ethernet packets over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable.
The RTL8211E/RTL8211EG uses state-of-the-art DSP technology and an Analog Front End (AFE) to enable high-speed data transmission and reception over UTP cable. Functions such as Crossover Detection & Auto-Correction, polarity correction, adaptive equalization, cross-talk cancellation, echo cancellation, timing recovery, and error correction are implemented in the RTL8211E/RTL8211EG to provide robust transmission and reception capabilities at 10Mbps, 100Mbps, or 1000Mbps.
Data transfer between MAC and PHY is via the Reduced Gigabit Media Independent Interface (RGMII) for 1000Base-T, 10Base-T, and 100Base-TX.

特性 Features

1000Base-T IEEE 802.3ab Compliant
100Base-TX IEEE 802.3u Compliant
10Base-T IEEE 802.3 Compliant
IEEE 802.3 Compliant RGMII (RTL8211E/RTL8211EG)
IEEE 802.3 Compliant GMII (RTL8211EG only)
Supports IEEE 802.3az Draft 3.2 (Energy Efficient Ethernet)
Built-in Wake-on-LAN (WOL)
Supports Interrupt function
Supports Parallel Detection
Crossover Detection & Auto-Correction
Automatic polarity correction
Supports PHYRSTB core power Turn-Off
Baseline Wander Correction
Supports half/full duplex operation
Supports 120m for CAT.5 cable in 1000Base-T
Supports 3.3V or 2.5V signaling for RGMII/GMII
Supports 25/50MHz external crystal or OSC
Provides 125MHz clock source for MAC
Provides 3 network status LEDs
Supports Link Down power saving
Green Ethernet (Gigabit mode only)
Built-in switching regulator
Packages

48-pin QFN (RTL8211E)
64-pin QFN (RTL8211EG)
0.11µm process with very low power consumption