RTL8211BG数据手册Realtek中文资料规格书

描述 Description

This product is covered by one or more of the following patents:US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
The Realtek RTL8211BG is a highly integrated Ethernet transceiver that complies with 10Base-T, 100Base-TX, and 1000Base-T IEEE 802.3 standards. It provides all the necessary physical layer functions to transmit and receive Ethernet packets over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable.The RTL8211BG uses state-of-the-art DSP technology and an Analog Front End (AFE) to enable high-speed data transmission and reception over UTP cable. Functions such as Crossover Detection & Auto-Correction, polarity correction, adaptive equalization, cross-talk cancellation, echo cancellation, timing recovery, and error correction are implemented in the RTL8211BG to provide robust transmission and reception capabilities at 10Mbps, 100Mbps, or 1000Mbps.Data transfer between MAC and PHY is via the Reduced Gigabit Media Independent Interface (RGMII) and Gigabit Media Independent Interface (GMII), for 1000Base-T, and Media Independent Interface (MII) for 10Base-T/100Base-TX.

特性 Features

1000Base-T IEEE 802.3ab Compliant
100Base-TX IEEE 802.3u Compliant
10Base-T IEEE 802.3 Compliant
IEEE 802.3 Compliant RGMII/GMII/MII
Supports Auto-Negotiation
Supports Parallel Detection
Crossover Detection&Auto-Correction
Automatic polarity correction
Transmit wave-shaping
DSP processing
Internal hybrids for 1000Base-T
Baseline Wander Correction
Supports half/full duplex operation
Transmission rate up to 1Gbps over industry standard CAT.5 UTP cable with BER less than 10-10 in 1000Base-T
The design transceiver capability target is up to 140m for CAT.5 cable in 1000Base-T
Supports 3.3V or 2.5V signaling for GMII /RGMII
Supports power down mode
Supports Link Down Power Saving
Supports 25MHz external crystal or OSC
Provides 125MHz clock source for MAC
Provides 6 network status LEDs
100-pin LQFP
0.15µm process with very low power consumption