General Purpose Relays PCB Relays

Power PCB Relay RT1 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact DC or AC coil 5kV/10mm coil-contact, reinforced insulation Ambient temperature 85°C (DC coil) WG version: product in accordance to IEC 60335-1 Reflow version: for THR (Through-Hole Reflow) soldering process T

文件：543.08 Kbytes 页数：4 Pages

TEC

泰科电子

FLAT PANEL DISPLAY CONTROLLER

[REALTEK] General Description The Realtek RTD2020 is a highly-integrated single chip IC controller solution for producing real time, top quality digital video and computer graphic images on LCD monitor/flat panel displays, such as XGA LCD monitors. LCD monitors and flat panel displays prov

文件：84.22 Kbytes 页数：11 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

Dual-Input LCD Display Controller

Features General
Embedded 2 DDC with DDC1/2B/CI
Zoom scaling up and down
Embedded one MCU with SPI flash controller.
It contains 4 ADCs in key pad application
Require only one crystal to generate all timing.
Programmable internal low-voltage-reset (LVR)
High resolution 6 chan

文件：373.2 Kbytes 页数：14 Pages

REALTEK

瑞昱

Dual-Input LCD Display Controller

Features General
Embedded 2 DDC with DDC1/2B/CI
Zoom scaling up and down
Embedded one MCU with SPI flash controller.
It contains 4 ADCs in key pad application
Require only one crystal to generate all timing.
Programmable internal low-voltage-reset (LVR)
High resolution 6 chan

文件：373.2 Kbytes 页数：14 Pages

REALTEK

瑞昱

Flat Panel Display Controller

Functional Description Digital Input (ITU 656) RTD2522 is designed to connect the interface of digital signal from video decoder. Input data is latched within a capture window defined in registers. The timing scheme designed for input devices are showed in the following diagram.

文件：844.4 Kbytes 页数：94 Pages

REALTEK

瑞昱

Flat Panel Display Controller

Functional Description Digital Input (ITU 656) RTD2522 is designed to connect the interface of digital signal from video decoder. Input data is latched within a capture window defined in registers. The timing scheme designed for input devices are showed in the following diagram.

文件：844.4 Kbytes 页数：94 Pages

REALTEK

瑞昱

Flat Panel Display Controller

Features General
Programmable Scaling up and down
No external memory required.
Require only one crystal to generate all timing.
Programmable 3.3V detection for multi-power domain in a system
2 channels 8 bits PWM output, and wide range selectable PWM frequency.
Support

文件：2.75047 Mbytes 页数：307 Pages

REALTEK

瑞昱

Flat Panel Display Controller

Features General
Programmable Scaling up and down
No external memory required.
Require only one crystal to generate all timing.
Programmable 3.3V detection for multi-power domain in a system
2 channels 8 bits PWM output, and wide range selectable PWM frequency.
Support

文件：2.75047 Mbytes 页数：307 Pages

REALTEK

瑞昱

Flat Panel Display Controller

Features General
Programmable Scaling up and down
No external memory required.
Require only one crystal to generate all timing.
Programmable 3.3V detection for multi-power domain in a system
2 channels 8 bits PWM output, and wide range selectable PWM frequency.
Support

文件：2.75047 Mbytes 页数：307 Pages

REALTEK

瑞昱

Flat Panel Display Controller

Features General
Programmable Scaling up and down
No external memory required.
Require only one crystal to generate all timing.
Programmable 3.3V detection for multi-power domain in a system
2 channels 8 bits PWM output, and wide range selectable PWM frequency.
Support

文件：2.75047 Mbytes 页数：307 Pages

REALTEK

瑞昱