Photointerrupter, encased type

The RPI-1391 is a transmissive-type photointerrupter that uses a photo IC. A positioning pin is provided on the external case to allow precise snap-in mounting on the PC board. Features 1) Small slit width (0.5 mm) for high precision. 2) Fast response. Applications Optical con

文件：81.13 Kbytes 页数：3 Pages

ROHM

罗姆

Photointerrupter, double-layer mold type

Features 1) Ultra-small. 2) Minimal influence from stray light. 3) Low collector-emitter saturation voltage. Applications Optical control equipment Cameras Floppy disk drives

文件：76.08 Kbytes 页数：3 Pages

ROHM

罗姆

Photointerrupter, Small type

Features 1) Ultra-small. 2) Minimal influence from stray light. 3) Low collector-emitter saturation voltage. Applications Optical control equipment Cameras Floppy disk drives

文件：49.7 Kbytes 页数：2 Pages

ROHM

罗姆

Photointerrupter, double-layer mold type

Features 1) Ultra-small. 2) Minimal influence from stray light. 3) Low collector-emitter saturation voltage. Applications • Optical control equipment • Digital video disc • Cameras

文件：82.64 Kbytes 页数：3 Pages

ROHM

罗姆

Photointerrupter, double-layer mold type

The RPI-243 is a compact, double-layer mold photointerrupter. Features 1) Compact package based on the double-mold method. 2) High resolution (slit width = 0.4 mm). 3) Gap between emitter and detector is 2.0 mm. Applications Floppy disk drives Printers CD-ROM

文件：70.95 Kbytes 页数：3 Pages

ROHM

罗姆

Photointerrupter, double-layer mold type

The RPI-244 is a compact, double-layer mold photointerrupter. Features 1) Compact package based on the double-mold method. 2) High resolution (slit width = 0.4 mm). 3) Gap between emitter and detector is 2.0 mm. Applications Floppy disk drives Printers

文件：71.08 Kbytes 页数：3 Pages

ROHM

罗姆

Photointerrupter, double-layer mold type

Features 1) Compact package based on the double-mold. 2) Method High resolution (slit width = 2.0mm) 3) Gap between emitter and detector is 2.0mm. Applications Floppy disk drives Movie equipment Cameras Printers

文件：71.85 Kbytes 页数：3 Pages

ROHM

罗姆

Photointerrupter, double-layer mold type

Features 1) Positioning pin enables precision mounting. 2) Gap between emitter and detector is 3.0mm. 3) Compact Applications Floppy disk drives Printers Facsimiles VCR

文件：77.27 Kbytes 页数：3 Pages

ROHM

罗姆

Photointerrupter, double-layer mold type

Features 1) Compact with a 4mm gap. 2) High precision position detection (slit width of 0.5mm). 3) Minimal influence from stray light. 4) Low collector-emitter voltage. Applications Optical control equipment Facsimiles Printers

文件：74.41 Kbytes 页数：3 Pages

ROHM

罗姆

Transmission type Photointerrupters Eco-Friendry type

Features 1) Positioning pin results in high mounting accuracy 2) Gap4.0mm Applications • Printers • Optical Control Equipment • Amusement

文件：321.69 Kbytes 页数：6 Pages

ROHM

罗姆