3.2V TO 4.2V, 2.4GHz FRONT END MODULE

文件：755.91 Kbytes 页数：9 Pages

RFMD

威讯联合

3.2V TO 4.2V, 2.4GHz FRONT END MODULE

文件：755.91 Kbytes 页数：9 Pages

RFMD

威讯联合

SMART RADIO TRANSCEIVER

文件：365.83 Kbytes 页数：11 Pages

RFSOLUTIONS

2.7V TO 3.6V MODULE FOR INTEGRATION WITH 900MHz SMART ENERGY AMI

文件：857.82 Kbytes 页数：12 Pages

QORVO

威讯联合

2.7V TO 3.6V MODULE FOR INTEGRATION WITH 900MHz SMART ENERGY AMI

文件：857.82 Kbytes 页数：12 Pages

RFMD

威讯联合

2.7V TO 3.6V MODULE FOR INTEGRATION WITH 900MHz SMART ENERGY AMI

文件：857.82 Kbytes 页数：12 Pages

RFMD

威讯联合

2.7V TO 3.6V MODULE FOR INTEGRATION WITH 900MHz SMART ENERGY AMI

文件：857.82 Kbytes 页数：12 Pages

QORVO

威讯联合

SMART RADIO TRANSCEIVER

文件：365.83 Kbytes 页数：11 Pages

RFSOLUTIONS

433 - 470 MHz, 3.3 - 4 V Transmit / Receive Front End Module

Qorvo's RF6504 is a front end module (FEM) intended for 433MHz to 470MHz AMI/AMR systems. This module provides separate ports for Rx and Tx paths. The Tx section provides a PA with nominal output power of 30dBm and gain of 15dB. The Rx is a pass through. Both are combined to a single antenna port wi ·Tx Output Power: 30dBm\n·Separate 50 ohm Tx/Rx Transceiver\n·Interface Rx Insertion Loss: 1dB;

Qorvo

威讯联合

2.4 GHz 802.11b/g Wi-Fi / ISM / ZigBee Front End Module

Qorvo's RF6505 integrates a complete solution in a single Front End Module (FEM) for Wi-Fi and ZigBee® applications in the 2.4GHz to 2.5GHz band. This FEM integrates the PA plus harmonic filter in the transmit path and the LNA with bypass mode in the receive side. It provides a single balanced TDD a ·Tx P1dB: 27dBm\n·Tx Gain : 28dB\n·Rx Gain: 10dB\n·Rx NF: 2.5dB\n·Integrated LNA With Bypass Mode;

Qorvo

威讯联合