RF2352PCBA中文资料威讯联合数据手册PDF规格书

Product Description

The RF2352 is a low noise driver amplifier for 900MHz CDMA/AMPS applications. The device is designed for operation from 2.7V to 3.6V, and features selectable high and low gain modes. In high gain mode, the device will provide about 19dB of gain, and the linearity and current drain are set with an external resistor, allowing the designer to select the optimum performance for a given application. In the low gain, or “bypass” mode, the gain is controlled by an external attenuator network, and the device draws essentially no current. The part is fabricated using a high performance silicon BiCMOS process, and is packaged in a 4mmx4mm, 16-pin, leadless chip carrier.

特性 Features

• Low Noise and High Intercept Point

• Power Down Control

• Gain Control

• Single 2.7V to 3.6V Power Supply

• Extremely Small MLF16 Package

Typical Applications

• TDMA/CDMA/FM Driver Amplifier

• Low Noise Transmit Driver Amplifier

• General Purpose Amplification

• Commercial and Consumer Systems