scsi&ecl termination networks

文件：93.95 Kbytes 页数：2 Pages

KOA

丝印：RDA05-4；Package：SOP-08；Low Capacitance TVS Diode Array

文件：1.42169 Mbytes 页数：4 Pages

LEIDITECH

雷卯电子

丝印：RDA3.3-4；Package：SOP-08；Low Capacitance TVS Diode Array For High Speed Interface

文件：278.13 Kbytes 页数：3 Pages

LEIDITECH

雷卯电子

50 - 4000 MHz Serial Controlled Digital Variable Gain Amplifier, 6-Bit, 0.5 dB Steps

Qorvo's RDA1005L is a digitally controlled variable gain amplifier featuring high linearity over the entire gain control range with noise figure less than 6dB in its maximum gain state. The gain of the 6-bit digital step attenuator is programmed with a serial mode control interface. The RDA1005L is • Broadband 50MHz to 4000MHz Operation\n• 6-Bit Digital Step Attenuator\n• Serial Mode Programming Gain = -13.5 to +18dB (0.5dB Step Size)\n• High OIP3/P1dB = +38dBm/20dBm\n• Single +5V Supply\n• Small 32-Pin, 5.2mm x 5.2mm, MCM (Footprint Compatible with 5mm x 5mm, 32-Pin, QFN);

Qorvo

威讯联合

50 - 1000 MHz Parallel Controlled Digital Variable Gain Amplifier, 6-Bit, 0.5 dB Steps

Qorvo's RDA2032Z is a digital controlled variable gain amplifier (DVGA) featuring high linearity over the entire gain control range. The attenuation of the 6-bit digital step attenuator is programmed with a parallel mode control interface. The RDA2032Z has two amplifier stages packaged in a small 5. • Broadband 50MHz to 1000MHz Operation\n• 6-Bit Digital Step Attenuator\n• Parallel Mode Gain Programming\n• Max Gain=38.8dB at 140MHz\n• Gain Control Range=31.5dB (0.5dB Step Size)\n• High OIP3/P1dB=+42/20dBm at 140MHz\n• Single +5V Supply 3V or 5V Logic Level Compatible\n• Small 32-Pin, 5.2mm x 5.;

Qorvo

威讯联合

Small-signal MOS

RDSEMI

达晶微电子

包装：散装 类别：盒子，外壳，机架 机架配件 描述：RACK HARDWARE

Hammond Manufacturing

包装：散装 类别：盒子，外壳，机架 机架配件 描述：RACK HARDWARE

Hammond Manufacturing

包装：盒 类别：盒子，外壳，机架 机架配件 描述：RACK HARDWARE

Hammond Manufacturing