丝印：PTPackage：DO-214AC；5.0 To 200V 600W Surface Mount Transient Voltage Suppressors (TVS)

Glass passivated chip 600W peak pulse power capability with a 10/1000us waveform Repetitive rate (duty cycle):0.01 Typical IR less than 1μA above 10V Excellent clamping capability Very fast response time High temperature soldering: 260°C/10s at terminals. RoHS compliant Features

文件：3.35089 Mbytes 页数：6 Pages

UNSEMI

优恩半导体

丝印：pTPackage：SOT886；Low-power D-type flip-flop; positive-edge trigger

1. General description The 74AUP1G80 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and its complement will appear at the Q output. Schmitt-trigger act

文件：295 Kbytes 页数：20 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：pTPackage：SOT1115；Low-power D-type flip-flop; positive-edge trigger

1. General description The 74AUP1G80 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and its complement will appear at the Q output. Schmitt-trigger act

文件：295 Kbytes 页数：20 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：pTPackage：SOT1202；Low-power D-type flip-flop; positive-edge trigger

1. General description The 74AUP1G80 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and its complement will appear at the Q output. Schmitt-trigger act

文件：295 Kbytes 页数：20 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：pTPackage：SOT353-1；Low-power D-type flip-flop; positive-edge trigger

1. General description The 74AUP1G80 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and its complement will appear at the Q output. Schmitt-trigger act

文件：295 Kbytes 页数：20 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：pTPackage：SOT1226-3；Low-power D-type flip-flop; positive-edge trigger

1. General description The 74AUP1G80 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and its complement will appear at the Q output. Schmitt-trigger act

文件：295 Kbytes 页数：20 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：pTPackage：SOT1116；Low-power dual D-type flip-flop; positive-edge trigger

1. General description The 74AUP2G80 provides the dual positive-edge triggered D-type flip-flop. Information on the data input is transferred to the Q output on the LOW-to-HIGH transition of the clock pulse. The input pin D must be stable one setup time prior to the LOW-to-HIGH clock transition

文件：279.64 Kbytes 页数：19 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：pTPackage：SOT1203；Low-power dual D-type flip-flop; positive-edge trigger

1. General description The 74AUP2G80 provides the dual positive-edge triggered D-type flip-flop. Information on the data input is transferred to the Q output on the LOW-to-HIGH transition of the clock pulse. The input pin D must be stable one setup time prior to the LOW-to-HIGH clock transition

文件：279.64 Kbytes 页数：19 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：PTPackage：SOT-23-3；ULTRA LOW QUIESCENT CURRENT CMOS LDO

Features - Ultra-Low Quiescent Current: 1.0μA Typical - Output Voltages: 1.2V, 1.4V, 1.5V, 1.8V, 2.1V, 2.2V, 2.5V, 2.8V, 3.0V, 3.3V, 3.6V and 4.0V - High Output Voltage Accuracy: ±2 - Output Current: 250mA - Low Dropout Voltage: - 25mV Typical at IOUT = 10mA and VOUT = 3V - 200mV Typical a

文件：780.53 Kbytes 页数：29 Pages

DIODES

美台半导体

丝印：PTPackage：SSOP5；Free Delay Time Setting CMOS Voltage Detector IC Series

Description ROHM’s BD52□□G/FVE and BD53□□G/FVE series are highly accurate, low current consumption reset IC series with a built-in delay circuit. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V,

文件：400.42 Kbytes 页数：16 Pages

ROHM

罗姆