PASSIVATED ASSEMBLED CIRCUIT ELEMENTS

Description The P100 series of Integrated Power Circuits consists of power thyristors and power diodes configured in a single package. With its isolating base plate, mechanical designs are greatly simpli fied giving advantages of cost reduction and reduced size. Applications include power suppli

文件：82.66 Kbytes 页数：7 Pages

IRF

P126

FEATURES Small, lightweight, and cost effective patented design Hermetic seal ensures clean consistent contact environment RoHS2 compliant Make / Break switching to 1200Vdc Can be installed in any position Capable of bi-directional switching Perfect choice for pre-charge, charge, and solar

文件：633.78 Kbytes 页数：5 Pages

SENSATA

森萨塔

isc N-Channel MOSFET Transistor

FEATURES ·Drain Current –ID= 126A@ TC=25℃ ·Drain Source Voltage- : VDSS= 100V(Min) ·Static Drain-Source On-Resistance : RDS(on) = 0.0048Ω(Max)@VGS= 10V ·100 avalanche tested ·Minimum Lot-to-Lot variations for robust device performance and reliable operation DESCRIPTION ·motor drive, DC-D

文件：333.17 Kbytes 页数：2 Pages

ISC

无锡固电

isc N-Channel MOSFET Transistor

FEATURES ·Drain Current –ID= 126A@ TC=25℃ ·Drain Source Voltage- : VDSS= 100V(Min) ·Static Drain-Source On-Resistance : RDS(on) = 4.8mΩ(Max)@VGS= 10V ·100 avalanche tested ·Minimum Lot-to-Lot variations for robust device performance and reliable operation DESCRIPTION ·motor drive, DC-DC

文件：333.5 Kbytes 页数：2 Pages

ISC

无锡固电

TPSF12C1 Standalone Active EMI Filter for Common-mode Noise Mitigation in Single- Phase AC Power Systems

1 Features • Functional Safety-Capable – Documentation available to aid functional safety system design • Voltage-sense, current-inject active EMI filter – Optimized for CISPR 11 and CISPR 32 Class B conducted EMI requirements – Low impedance for common-mode emissions over the applicable E

文件：2.48511 Mbytes 页数：31 Pages

TI

德州仪器

TPSF12C1-Q1 Standalone Active EMI Filter for Common-mode Noise Mitigation in Single-Phase AC Automotive Power Systems

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: –40°C to +125°C ambient operating temperature • Functional Safety-Capable – Documentation available to aid functional safety system design • Voltage-sense, current-inject active EMI filter – Optimize

文件：2.10586 Mbytes 页数：26 Pages

TI

德州仪器

TPSF12C3 Standalone Active EMI Filter for Common-mode Noise Mitigation in Three- Phase AC Power Systems

1 Features • Functional Safety-Capable – Documentation available to aid functional safety system design • Voltage-sense, current-inject active EMI filter – Optimized for CISPR 11 and CISPR 32 Class B conducted EMI requirements – Low impedance for common-mode emissions over the applicable E

文件：2.35323 Mbytes 页数：30 Pages

TI

德州仪器

TPSF12C3-Q1 Standalone Active EMI Filter for Common-mode Noise Mitigation in Three-Phase AC Automotive Power Systems

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: –40°C to +125°C ambient operating temperature • Functional Safety-Capable – Documentation available to aid functional safety system design • Voltage-sense, current-inject active EMI filter – Optimize

文件：2.21423 Mbytes 页数：29 Pages

TI

德州仪器

8-Pin, 8-Bit CMOS Microcontroller

GENERAL DESCRIPTION The PIC12C5XX from Microchip Technology is a family of low-cost, high performance, 8-bit, fully static, EEPROM/EPROM/ROM-based CMOS microcontrollers. It employs a RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (1 µs) exc

文件：526.45 Kbytes 页数：84 Pages

MICROCHIP

微芯科技

isc N-Channel MOSFET Transistor

FEATURES ·Drain Current –ID=12A@ TC=25℃ ·Drain Source Voltage- : VDSS= 600V(Min) ·Static Drain-Source On-Resistance : RDS(on) = 0.67Ω(Max)@VGS= 10V ·100 avalanche tested ·Minimum Lot-to-Lot variations for robust device performance and reliable operation DESCRIPTION ·motor drive, DC-DC co

文件：323.81 Kbytes 页数：2 Pages

ISC

无锡固电