Integrated Circuit TV Sound, IF Amp

Features & Applications:\n• Exceptionally High Gain: Power Gain at 4.5Hz – 75dB typ.\n• Excellent Limiting Characteristics: Input Limiting Voltage (Knee) = 300µV at 4.5MHz\n• Excellent AM Rejection: 50dB at 4.5MHz\n• High Audio–Voltage Recovery: 20mV Typ at 4.5MHz, 25kHz Deviation\n• Wide Frequency

NTE

Integrated Circuit Audio Power Amplifier, 20W

Features: • High Output Power: 20W Typ (±B1 = ±22V, RL = 8Ω, f = 20Hz to 20kHz, THD = 1) 18W Typ (±B1 = ±22V, RL = 8Ω, f = 20Hz to 20kHz, THD = 0.5) where: ±B1: Supply Voltage, RL: Load Frequency, f: Frequency, THD: Total Harmonic Distortion, ±B2 = 25V constant • V

文件：28.05 Kbytes 页数：3 Pages

NTE

Dual, Audio Power Amplifier, 22W BTL

Description: The NTE7041 is an integrated circuit in a 17–Lead SIP type package designed for stereo audio use in car stereo applications. This device has two built–in channels to reduce the characteristic difference between L and R channels. In addition, the NTE7041 contains stand–by and muting

文件：30.14 Kbytes 页数：3 Pages

NTE

Integrated Circuit Bi-Directional Motor Driver

Description: The NTE7042 is a Bi–Directional Motor Drive in a 9–Lead SIP type package and generates an output current of 700mA (Max) with 4 output modes of forward rotation, reverse rotation, stop (idling), and brake according to input logic (2 inputs). The GNDs of the logic unit and power unit

文件：25.19 Kbytes 页数：2 Pages

NTE

Integrated Circuit Motor Driver w/4 Modes

Features: • 4 Modes Available: CW, CCW, STOP, and BRAKE • Output Current Up to 1A (Average) and 2A (Peak) • Wide Range of Operating Voltage: VCC opr = 4.5V to 18V VS = 0 to 18V Vref = 0 to 18V • Built–In Thermal Shutdown, Overcurrent Protector, and Punch–Through Curre

文件：43.98 Kbytes 页数：4 Pages

NTE

Integrated Circuit Motor Driver w/4 Modes

Features: • 4 Modes Available: CW, CCW, STOP, and BRAKE • Output Current Up to 1A (Average) and 2A (Peak) • Wide Range of Operating Voltage: VCC opr = 4.5V to 18V VS = 0 to 18V Vref = 0 to 18V • Built–In Thermal Shutdown, Overcurrent Protector, and Punch–Through Curre

文件：43.98 Kbytes 页数：4 Pages

NTE

Integrated Circuit Switching Regulator Control Circuit

Description: The NTE7044 is an integrated circuit in a 9–Lead SIP type package which contains a PWM switching regulator control circuit and protect circuit on a single chip. Features: • Soft Start Circuit • 0 to 0.7 Duty • Protection Circuit for Overvoltage and Current • Extern

文件：37.74 Kbytes 页数：2 Pages

NTE

Integrated Circuit Horizontal Signal Processing Circuit for CRT Displays

Features: • Processing for both Negative and Positive Sync. Signal • Wide Horizontal Oscillation Frequency Range: 14kHz to 60kHz • Wide Output Pulse Width Selection: 2µs to 40µs

文件：26.83 Kbytes 页数：2 Pages

NTE

Integrated Circuit Hybrid Switching Regulator

Integrated Circuit Hybrid Switching Regulator

文件：24.86 Kbytes 页数：2 Pages

NTE

Integrated Circuit TV Color Small Signal Sub System

Features: • Vision IF Amplifier with Synchronous Demodulator • Automatic Gain Control (AGC) Detector Suitable for Negative Modulation • AGC Tuner • Automatic Frequency Control (AFC) Circuit with Sample–and–Hold • Video Preamplifier • Sound IF Amplifier and Demodulator • DC Vol

文件：71.35 Kbytes 页数：8 Pages

NTE