Integrated Circuit 3 Channel Analog Switch

Description: The NTE7110 is an integrated circuit in a 16–Lead DIP type package designed for use as an electronic switch in VCR and audio signal processing applications. This device contains three channel two input switch circuits with each switch being controlled independently. Features: ● Low

文件：22.36 Kbytes 页数：2 Pages

NTE

Integrated Circuit Color TV Video Signal/Chrominance Signal Processing Circuit

Description: The NTE7112 is an integrated circuit in an 18–Lead DIP type package designed for use in color TV video signal and chrominance signal processing circuits. Features: ● Chrominance signal processing circuitry for either PAL or SECAM system color TV receivers can be made by using the N

文件：28.04 Kbytes 页数：3 Pages

NTE

Integrated Circuit Dual Audio Power Amplifier, 14W BTL

Description: The NTE7113 is an integrated circuit in a 16−Lead Staggered SIP type package designed for use as a 14W (13.2V, 4Ω) output power amplifier. Stereo operation is enabled due to incorporating two BTL amplifiers. High reliability is obtained due to incorporating protectors. ON/OFF is enab

文件：82.34 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio Power Amplifier, Quad 11W (2 x 22W)

Description: The NTE7114 is an integrated class−B output amplifier in a 17−Lead Staggered SIP type package designed for use in car radio applications. The circuit contains 4 x 11W single−ended or 2 x 22W bridge amplifiers. Features: ● Few External Components ● Flexible in Use: Quad Single−Ende

文件：97.87 Kbytes 页数：4 Pages

NTE

Integrated Circuit Color TV Horizontal Combination Circuit

Description: The NTE71115 is a monolithic integrated circuit in a 18–Lead DIP type package designed for use in color television receivers. Features: ● Positive Video Input: Capacitively Coupled (Source Impedance

文件：44.54 Kbytes 页数：6 Pages

NTE

Integrated Circuit Phase Lock Loop (PLL) Stereo Decoder (BTSC System)

Description: The NTE7116 is a phase lock loop (PLL) stereo decoder in a 20–Lead DIP type package designed primarily for low cost stereo decoding in a low–to–medium–line TV. The MUX input (Pin1) is a low impedance current input, the gain of the input amplifier is therefore determined by the extern

文件：37.8 Kbytes 页数：5 Pages

NTE

Integrated Circuit Switched-Mode Power Supply Controller

Description: The NTE7117 is a control circuit in an 8–Lead DIP type package designed for use in switched–mode power supplies. It contains an internal temperature–compensated supply, PWM, sawtooth oscillator, over–current sense latch, and output stage. This device is intended for low cost SMPS app

文件：22.42 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio Power Amplifier, 50W

Description: The NTE7118 integrated circuit is a hi–fi power amplifier in a 9–Lead SIP type package designed for use as a building block in radio, TV, and other audio applications. The high performance of the IC meets the requirements of digital sources (e.g. Compact Disc equipment). Features:

文件：26.48 Kbytes 页数：3 Pages

NTE

Integrated Circuit 22W BTL (2 x 11W) Stereo Power Amplifier

Description: The NTE7119 integrated circuit is a class–B dual output amplifier in a 9–Lead SIP type package designed primarily for use in car radio applications. This device contains two identical amplifiers with differential input stages. The gain of each amplifier is fixed at 40dB. Features:

文件：30.6 Kbytes 页数：4 Pages

NTE

Integrated Circuit Dual Audio Power Amplifier, 14W BTL

NTE