Integrated Circuit FM/AM Tuner System

Description: The NTE1486 is an integrated circuit in a 16+2−Lead DIP type package designed for use in stereo applications. This high performance device integrates all the functions necessary for FM IF and detection by AM IF amplifiers. Features: • Labor Saving and Miniaturization are Po

文件：78.19 Kbytes 页数：3 Pages

NTE

Integrated Circuit AM RF Converter, IF Amp

Integrated Circuit AM RF Converter, IF Amp

文件：19.18 Kbytes 页数：2 Pages

NTE

Integrated Circuit FM IF Amp, Demod w/Muting, Center Meter and Signal Meter

Features: • Low Distortion • High Signal–to–Noise Ratio • High Limiting Sensitivity • Large Muting Attenuation • Provides Specific Signal for Direct Drive of a Signal Meter with Good Linearity • Muting Level is Variable by Adjusting the External Resistor • Hig Stability Agains

文件：25 Kbytes 页数：3 Pages

NTE

Integrated Circuit Stereo Demodulator

Description: The NTE1489 is a silicon monolithic integrated circuit in a 16–Lead DIP type package designd for use as an FM multiplex demodulator for high class stere FM tuners. As the IC adopts a PLL (Phase Lock Loop) system, complexity of contol is usually experienced when using conventional e

文件：25.3 Kbytes 页数：3 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 页数：4 Pages

NTE

Integrated Circuit FM/AM Radio Receiver System 16−Lead DIP

Features: • Stability is improved by use of the full balance DC feedback type differential IF amplifier • High sensitivity (Input limiting sensitivity is 32dBμ) • Large detection output (450mVrms typ, 100 mod.) • Utilizing the external resistance it can be changed freely • High S/N

文件：76.45 Kbytes 页数：2 Pages

NTE

Integrated Circuit AM RF/IF Amp

Description: The NTE1491 is an integrated circuit in a 14–Lead DIP type package designed for AM/FM receivers. Features: • Low External Parts • IF, RF, AGC, in One Single Package • Dual AGC Amps

文件：22.71 Kbytes 页数：2 Pages

NTE

Integrated Circuit TV Video IF Amp

Features: • Particularly useful in B/W TV’s with bipolar tuners • Low external parts count • Designed to operate at VCC down to 6.5V • Video output level stabilized, independent of supply voltage and ambient temperature Functions: • Picture IF Amplifier • Video Detector •

文件：71.79 Kbytes 页数：2 Pages

NTE

Integrated Circuit AM radio Receiver System

Features: • Excellent overload characteristics • Low harmonic distortion • Buffered output signal for tuning meter • Delayed AGC for RF amplifier • Low noise RF amplifier • Wide supply voltage range: 9 to 14V

文件：79.62 Kbytes 页数：2 Pages

NTE

Integrated Circuit AM RF Mixer, IF Amplifier

Description: The NTE1495 is a monolithic integrated circuit in a 15−Lead Staggered SIP type package. This device is suitable for use as an AM tuner in automotive radio receivers, specifically where compact mounting is required and contains an RF amplifier, mixer, IF amplifier, and two types of

文件：61.05 Kbytes 页数：3 Pages

NTE