Integrated Circuit Low Noise Eqalizer Amp

Description: The NTE347 is designed for 13.6 volt, VHF large signal power amplifier applications required in military and industrial equipment operating to 240MHz. Features: Low lead inductance stripline package for easier design and increased broadband capability. Balanced Emitter C

文件：74.79 Kbytes 页数：1 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 页数：4 Pages

NTE

Integrated Circuit 2−Channel, Low Noise, Equalizer Amp

Integrated Circuit 2−Channel, Low Noise, Equalizer Amp

文件：79.38 Kbytes 页数：1 Pages

NTE

Integrated Circuit 2−Channel, Low Noise, Equalizier Amp

Description: The NTE347 is designed for 13.6 volt, VHF large signal power amplifier applications required in military and industrial equipment operating to 240MHz. Features: Low lead inductance stripline package for easier design and increased broadband capability. Balanced Emitter C

文件：74.79 Kbytes 页数：2 Pages

NTE

Integrated Circuit Low Noise, Equailizer Amp

Absolute Maximum Ratings: Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . 28V Power Dissipation (TA ≤ +80°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mW Operating Temperature Range, Topt . . . . .

文件：67.85 Kbytes 页数：1 Pages

NTE

Integrated Circuit Low Noise, Equalizier Amp

Features: • High Open Loop Gain, Low Distortion • High S/N Because of High Gain at 1st Stage • Excellent Characteristics for Supply Voltage and Temperature

文件：70.21 Kbytes 页数：2 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 页数：4 Pages

NTE

Integrated Circuit Phase Lock Loop (PLL) FM Stereo Demod

Description: The NTE1461 is a multiplex integrated circuit in a 16−Lead SIP type package designed for use in FM car stereo applications. Due to its low distortion factor, this device can be used as a multiplex stereo demodulator appropriate for car component stereo units. Features: • Lo

文件：74.81 Kbytes 页数：3 Pages

NTE

Integrated Circuit Audio Preamp

Features: • Low Noise: VNI = 0.8μVrms (Typ.) • High Open Loop Voltage Gain: GVO = 92dB (Typ.) • Low Distortion: THD = 0.1 (Max.) at VOUT = 7Vrms, GV = 40dB, f = 1kHz

文件：67.54 Kbytes 页数：1 Pages

NTE

Integrated Circuit AF Power Amp for Tape Recorder

Features: • AF Output Power: 2.7W/3.2Ω, or 2.3W/4Ω • Small op Noise by Muting CRT • High Ripple Reduction • Good Supply Voltage Characteristics • No Switching Distortion at High Frequency

文件：72.13 Kbytes 页数：2 Pages

NTE