Integrated Circuit Video AGC Circuit for VCR

Integrated Circuit Video AGC Circuit for VCR

文件：21.83 Kbytes 页数：2 Pages

NTE

Integrated Circuit Video AGC Circuit for VCR

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)\nSupply Voltage (V12–4), VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.6V\nSupply Current, ICC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NTE

OPTICALLY COUPLED ISOLATORS

Description: Each Optoisolator in this data sheet contains an infrared Light Emitting Diode (LED) and a NPN silicon Photosensor. The OPI110 and OPI1264 devices have 890 nm Light Emitting Diode (LED) and NPN phototransistor sensor, whereas the OP113 has a 890 nm LED and a photodarlington sensor. T

文件：248.59 Kbytes 页数：2 Pages

OPTEK

OPTICALLY COUPLED ISOLATORS

Description: Each Optoisolator in this data sheet contains an infrared Light Emitting Diode (LED) and a NPN silicon Photosensor. The OPI110 and OPI1264 devices have 890 nm Light Emitting Diode (LED) and NPN phototransistor sensor, whereas the OP113 has a 890 nm LED and a photodarlington sensor. T

文件：248.59 Kbytes 页数：2 Pages

OPTEK

800mA Fixed Output CMOS LDO

General Description The TC1264 is a fixed output, high accuracy (typically ±0.5) CMOS low dropout regulator. Designed specifically for battery-operated systems, the TC1264’s CMOS construction eliminates wasted ground current, significantly extending battery life. Total supply current is typical

文件：448.83 Kbytes 页数：12 Pages

MICROCHIP

微芯科技