High-Speed Isochronous Multiplexer

Description The High-Speed Isochronous Multiplexer integrated circuit multiplexes up to eight Serial Telecom (ST-BUS) links onto a single 20 MHz loop to facilitate point-to-point data transport requirements. The MT90710 connects easily with standard Fiber Optic interfaces to form a complete elect

文件：113.66 Kbytes 页数：12 Pages

MITEL

High-Speed Isochronous Multiplexer

Description The High-Speed Isochronous Multiplexer integrated circuit multiplexes up to eight Serial Telecom (ST-BUS) links onto a single 20 MHz loop to facilitate point-to-point data transport requirements. The MT90710 connects easily with standard Fiber Optic interfaces to form a complete elect

文件：113.66 Kbytes 页数：12 Pages

MITEL

Octal T1/E1/J1 Framer

Description The MT9072 is a multi-port T1/E1/J1 framing device that integrates eight fully independent, feature rich framers. The device is software selectable between T1, E1 or J1 modes and meets the latest relevant recommendations and standards from Telcordia, ANSI, ETSI and ITU-T. An extensive

文件：3.73859 Mbytes 页数：275 Pages

ZARLINK

Zarlink Semiconductor Inc

Octal T1/E1/J1 Framer

Description The MT9072 is a multi-port T1/E1/J1 framing device that integrates eight fully independent, feature rich framers. The device is software selectable between T1, E1 or J1 modes and meets the latest relevant recommendations and standards from Telcordia, ANSI, ETSI and ITU-T. An extensive

文件：3.73859 Mbytes 页数：275 Pages

ZARLINK

Zarlink Semiconductor Inc

Octal T1/E1/J1 Framer

Description The MT9072 is a multi-port T1/E1/J1 framing device that integrates eight fully independent, feature rich framers. The device is software selectable between T1, E1 or J1 modes and meets the latest relevant recommendations and standards from Telcordia, ANSI, ETSI and ITU-T. An extensive

文件：3.73859 Mbytes 页数：275 Pages

ZARLINK

Zarlink Semiconductor Inc

CMOS E2/E3 Framer (E2/E3F)

Description The MT90732 E2/E3 Framer (E2/E3F) is a CMOS VLSI device that provides the functions needed to frame a wideband payload to one of four CCITT Recommendations. G.742, G.745, G.751, or G.753. The E2/E3 Framer interfaces to line circuitry with either dual rail or NRZ signals. On the termin

文件：61.37 Kbytes 页数：8 Pages

MITEL

CMOS E2/E3 Framer (E2/E3F)

Description The MT90732 E2/E3 Framer (E2/E3F) is a CMOS VLSI device that provides the functions needed to frame a wideband payload to one of four CCITT Recommendations. G.742, G.745, G.751, or G.753. The E2/E3 Framer interfaces to line circuitry with either dual rail or NRZ signals. On the termin

文件：61.37 Kbytes 页数：8 Pages

MITEL

CMOS DS3 Framer (DS3F)

Description The MT90733 DS3 Framer (DS3F) is designed for mapping broadband payloads into the DS3 frame format, which meets ANSI’s T1.107-1988 and supplement T1.107a-1990. Features • DS3 payload access in either bit-serial or nibble-parallel mode • C-bit parity or M13 operating mode • Separat

文件：52.87 Kbytes 页数：8 Pages

MITEL

CMOS DS3 Framer (DS3F)

Description The MT90733 DS3 Framer (DS3F) is designed for mapping broadband payloads into the DS3 frame format, which meets ANSI’s T1.107-1988 and supplement T1.107a-1990. Features • DS3 payload access in either bit-serial or nibble-parallel mode • C-bit parity or M13 operating mode • Separat

文件：52.87 Kbytes 页数：8 Pages

MITEL

T1/E1/J1 Single Chip Transceiver

Description The MT9074 is a single chip device, operable in either T1 or E1 mode, integrating either an advanced T1 (T1 mode) or PCM 30 (E1 mode) framer with a Line Interface Unit (LIU). Features • Combined E1 (PCM 30) and T1 (D4/ESF) framer, Line Interface Unit (LIU) and link controller with o

文件：372.74 Kbytes 页数：122 Pages

MITEL