MLX80020BB中文资料LIN Transceiver for SAE J2602 Standard数据手册Melexis规格书

描述 Description

The Melexis MLX80020BB transceiver is a physical layer device for a single wire data link capable of operating in applications using baud rates of 10.4kBd. The MLX80020BB is compatible to SAE J2602 specifications used by General Motors (GM) and Ford.
Because of the very low power consumption of the MLX80020 in the sleep mode it’s suitable for ECU applications with hard standby current requirements.
The implemented high resistive termination in sleep mode as well as the driving capability of the INH pin allows a comfortable handling of LIN short circuits to GND. In order to reduce the power consumption in case of failure modes, the integrated sleep timer takes care for switching the ECU into the most power saving sleep mode after power on or wake up events that are not followed by a mode change response of the microcontroller.
The MLX80020 has an improved EMI performance and ESD robustness.

特性 Features

·Compatible to LIN Physical Layer Specification SAE J2602
·Baud rate up to 10.4 kBaud
·Wide operating voltage range VS = 5 to 27 V
·Very low standby current consumption of 10µA in sleep mode
·Bus and local wake up capable with source recognition
·Control output for voltage regulator with low on – resistance for switchable master termination
·Low EME (emission) and high EMI (immunity) level
·Fully compatible to 3.3 V and 5 V devices
·Integrated termination resistor for LIN slave nodes
·TxD dominant timeout function
·Sleep timer to guarantee the most power saving mode after power on or wake up in case of faulty passive microcontroller
·High impedance bus pin in case of loss of ground and undervoltage condition
·Bus short to ground protection
·Enhanced ESD robustness according to IEC 61000-4-2
·RoHs compliant and AECQ-100 qualified

应用 Application

·汽车行业 - 动力系统
·汽车行业 - 混合动力和电动动力系统
·汽车行业 - 车身、空调系统、舒适和照明
·汽车行业 - 底盘与安全