MCP14A1202数据手册集成电路（IC）的栅极驱动器规格书PDF

描述 Description

The MCP14A1201/2 devices are high-speed MOSFET drivers that are capable of providing up to 12 A of peak current while operating from a single 4.5 V to 18 V supply. There are two output configurations available; inverting (MCP14A1201) and noninverting (MCP14A1202). These devices feature low shoot-through current, fast rise and fall times, and matched propagation delays which make them ideal for high speed switching frequency applications.The MCP14A1201/2 family of devices offers enhanced control with Enable functionality. The active-high Enable pin can be driven low to drive the output of the MCP14A1201/2 low, regardless of the status of the Input pin. An integrated pull-up resistor allows the user to leave the Enable pin floating for standard operation.These devices are highly latch-up resistant under any condition within their power and voltage ratings. They can accept up to 500 mA of reverse current being forced back into their outputs without damage or logic upset. All terminals are fully protected against electrostatic discharge (ESD) up to 2 kV (HBM) and 200 V (MM).

特性 Features

High Peak Output Current: 12 A (typical)
Wide Operating Range: 4.5 V to 18 V
Low Shoot-Through/Cross-Conduction Current in Output Stage
High Capacitive Load Drive Capability: 15,000 pF in 25 ns (typical)
Short Delay Times: 28 ns (D1)28 ns (D2) (typical)
Low Supply Current: 360 µA (typical)
Low Voltage Threshold Input and Enable with Hysteresis
Latch-Up Protected: Withstands 0.5 A Reverse Current

简介

MCP14A1202属于集成电路（IC）的栅极驱动器。由制造生产的MCP14A1202栅极驱动器栅极驱动器电源管理集成电路 (PMIC) 可用于提供隔离、放大、参考位移、自举或其他必要功能，这些功能可将来自电源转换应用中控制设备的信号连接到电源被控制通过的半导体设备（通常为 FET 或 IGBT）。任何特定设备提供的确切功能各不相同，但与它适合驱动的半导体配置相关。