MCP1416中文资料Tiny 1.5 A MOSFET Gate Driver数据手册Microchip规格书

描述 Description

The MCP1415/16 devices are small(Tiny) footprint Low-Side MOSFET gate drivers capable of supplying 1.5 A peak output current in a SOT23 5L package. The MCP1415 is an inverting low side driver meaning that when the input signal is high, the output is low. The MCP1416 is a non-inverting low side driver meaning that when the input signal is high, the output signal is also high. Although the name of the device is MOSFET gate driver, these devices have other applications besides driving the gate of a MOSFET. These devices are also used to direct drive a small DC motor, act as buffers for high speed data lines, and level translators to interface low voltage to high voltage.

特性 Features

Latch-up Immunity: Highly Resistant to Ground Bounce and Negative Input Thresholds
Matched Rise and Fall Times and Matched Propagation Delay Times
Input Will Withstand Negative Swings of Up to 5 V
High Peak Output Source/Sink Current: 1.5 A typically
470 pF in 10.0 ns (typ)
1000 pF in 20.0 ns (typ)
Wide Operating Range: 4.5 V to 18 V
Low Output Impedance
850 µA (With Logic “1” Input)
100 µA (With Logic “0” Input)
Can Withstand Up to 0.5 A of Output Reverse Current
ESD Protected: 4 kV
Low Shoot-Through / Cross-Conduction Current in Output Stage
Immune to Double Pulsing the Output with Slow Ramping Input Signals
Packaging: 5 Lead SOT-23

简介

MCP1416属于集成电路（IC）的栅极驱动器。由制造生产的MCP1416栅极驱动器栅极驱动器电源管理集成电路 (PMIC) 可用于提供隔离、放大、参考位移、自举或其他必要功能，这些功能可将来自电源转换应用中控制设备的信号连接到电源被控制通过的半导体设备（通常为 FET 或 IGBT）。任何特定设备提供的确切功能各不相同，但与它适合驱动的半导体配置相关。