MC100EPT26中文资料Translator, 1:2 Fanout Differential LVPECL / LVDS to LVTTL数据手册ONSEMI规格书

描述 Description

The MC100EPT26 is a 1:2 Fanout Differential LVPECL to LVTTL translator. Because LVPECL (Positive ECL) levels are used only +3.3V and ground are required. The small outline 8-lead SOIC package and the 1:2 fanout design of the EPT26 makes it ideal for applications which require the low skew duplication of a signal in a tightly packed PC board.The VBB output allows the EPT26 to be used in a single-ended input mode. In this mode the VBB output is tied to the D0bar input for a non-inverting buffer or the D0 input for an inverting buffer. If used, the VBB pin should be bypassed to ground via a 0.01 uF capacitator.

特性 Features

• 1.4ns Typical Propagation Delay
• Maximum Frequency > 275 MHz Typical
• The 100 Series Contains Temperature Compensation
• Operating Range: VCC = 3.0 V to 3.6 V with GND = 0 V
• Open Input Default State
• Safety Clamp on Inputs
• 24mA TTL outputs
• Q Outputs will default LOW with inputs open or at VEE
• VBB Output
• Pb-Free Packages are Available

简介

MC100EPT26属于集成电路（IC）的转换器电平移位器。由制造生产的MC100EPT26转换器，电平移位器逻辑转换器或电平移位器 IC 可用于在数字逻辑设备之间传递信息，这些设备可在不同/不兼容的供电电压下工作，或可实现不同的信令方式。例如，可以将需要 5 V 电源的数字输出传感器连接到具有 3.3 V I/O 电源的 FPGA，或者在 CMOS 或 TTL 等单端信令方式与 PECL 或 LVDS 等差分技术之间进行转换。