3.3 V / 5 V ECL 9-Bit Shift Register

3.3 V / 5 V ECL 9−Bit Shift Register The MC10EP/100EP142 is a 9−bit shift register, designed with byte-parity applications in mind. The MC10/100EP142 is capable of performing serial/parallel data into serial/parallel out and shifting in only one direction. The nine inputs D0 − D8 accept parallel

文件：176.4 Kbytes 页数：13 Pages

ONSEMI

安森美半导体

3.3 V / 5 V ECL 9-Bit Shift Register

3.3 V / 5 V ECL 9−Bit Shift Register The MC10EP/100EP142 is a 9−bit shift register, designed with byte-parity applications in mind. The MC10/100EP142 is capable of performing serial/parallel data into serial/parallel out and shifting in only one direction. The nine inputs D0 − D8 accept parallel

文件：176.4 Kbytes 页数：13 Pages

ONSEMI

安森美半导体

3.3 V / 5 V ECL 9-Bit Shift Register

3.3 V / 5 V ECL 9−Bit Shift Register The MC10EP/100EP142 is a 9−bit shift register, designed with byte-parity applications in mind. The MC10/100EP142 is capable of performing serial/parallel data into serial/parallel out and shifting in only one direction. The nine inputs D0 − D8 accept parallel

文件：176.4 Kbytes 页数：13 Pages

ONSEMI

安森美半导体

Clock Management Design Using Low Skew and Low Jitter Devices

Why Do We Need Clock Management? Can you imagine the chaos in our world if our clocks or watches were not synchronized to Greenwich Mean Time? How would trains, buses, and airplanes run on schedule? The miniseries Longitude was the story of a man who made a major technological breakthrough by inv

文件：209.34 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

3.3V / 5V ECL Differential Receiver/Driver with Internal Termination

Description The EP16T is a world−class differential receiver/driver. The device is functionally equivalent to the EP16 with internal termination resistors. A 50  resistor is connected from the D input to the VT pin and from the D input to the VT pin. Tie the VT and VT pins to VTT supply (VCC −

文件：75.66 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

3.3V / 5V ECL Differential Receiver/Driver with Internal Termination

Description The EP16T is a world−class differential receiver/driver. The device is functionally equivalent to the EP16 with internal termination resistors. A 50  resistor is connected from the D input to the VT pin and from the D input to the VT pin. Tie the VT and VT pins to VTT supply (VCC −

文件：75.66 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

3.3V / 5V ECL Differential Receiver/Driver with Internal Termination

Description The EP16T is a world−class differential receiver/driver. The device is functionally equivalent to the EP16 with internal termination resistors. A 50  resistor is connected from the D input to the VT pin and from the D input to the VT pin. Tie the VT and VT pins to VTT supply (VCC −

文件：75.66 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

3.3V / 5V ECL Differential Receiver/Driver with Internal Termination

Description The EP16T is a world−class differential receiver/driver. The device is functionally equivalent to the EP16 with internal termination resistors. A 50  resistor is connected from the D input to the VT pin and from the D input to the VT pin. Tie the VT and VT pins to VTT supply (VCC −

文件：75.66 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

3.3V / 5VECL Differential Receiver/Driver with High Gain

Description The EP16VA is a world−class differential receiver/driver. The device is functionally equivalent to the EP16 and LVEP16 devices but with high gain output. QHG and QHG outputs have a DC gain several times larger than the DC gain of an EP16. The VBB pin, an internally generated volt

文件：77.45 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

3.3V / 5VECL Differential Receiver/Driver with High Gain

Description The EP16VA is a world−class differential receiver/driver. The device is functionally equivalent to the EP16 and LVEP16 devices but with high gain output. QHG and QHG outputs have a DC gain several times larger than the DC gain of an EP16. The VBB pin, an internally generated volt

文件：77.45 Kbytes 页数：8 Pages

ONSEMI

安森美半导体