1:2 DIFFERENTIAL FANOUT BUFFER

The MC10EL/100EL11 is a differential 1:2 fanout buffer. The device is functionally similar to the E111 device but with higher performance capabilities. Having within-device skews and output transition times significantly improved over the E111, the EL11 is ideally suited for those applications whi

文件：61.87 Kbytes 页数：3 Pages

Motorola

摩托罗拉

Low Impedance Driver

The MC10EL/100EL12 is a low impedance drive buffer. With two pairs of OR/NOR outputs the device is ideally suited for high drive applications such as memory addressing. The device is a function equivalent to the E112 device with higher performance capabilities. With propagation delays significantl

文件：73.98 Kbytes 页数：2 Pages

ONSEMI

安森美半导体

Dual 1:3 Fanout Buffer

Description The MC100LVEL13 is a dual, fully differential 1:3 fanout buffer. The Low Output−Output Skew of the device makes it ideal for distributing two different frequency synchronous signals. Features • 500 ps Typical Propagation Delays • 50 ps Output−Output Skews • ESD Protection: >2 kV H

文件：91.05 Kbytes 页数：3 Pages

ONSEMI

安森美半导体

1:5 Clock Distribution Chip

Description The MC100LVEL14 is a low skew 1:5 clock distribution chip designed explicitly for low skew clock distribution applications. The device can be driven by either a differential or single-ended ECL or, if positive power supplies are used, PECL input signal. The LVEL14 is functionally and

文件：100.88 Kbytes 页数：4 Pages

ONSEMI

安森美半导体

1:5 Clock Distribution Chip

Description The MC100LVEL14 is a low skew 1:5 clock distribution chip designed explicitly for low skew clock distribution applications. The device can be driven by either a differential or single-ended ECL or, if positive power supplies are used, PECL input signal. The LVEL14 is functionally and

文件：100.88 Kbytes 页数：4 Pages

ONSEMI

安森美半导体

1:4 Clock Distribution Chip

The MC10EL/100EL15 is a low skew 1:4 clock distribution chip designed explicitly for low skew clock distribution applications. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB

文件：88.55 Kbytes 页数：4 Pages

ONSEMI

安森美半导体

Differential Receiver

The MC10EL/100EL16 is a differential receiver. The device is functionally equivalent to the E116 device with higher performance capabilities. With output transition times significantly faster than the E116, the EL16 is ideally suited for interfacing with high frequency sources. The VBB pin, an in

文件：69.44 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

丝印：1648；Package：TSSOP-8；5 V ECL Voltage Controlled Oscillator Amplifier

Description The MC100EL1648 is a voltage controlled oscillator amplifier that requires an external parallel tank circuit consisting of the inductor (L) and capacitor (C). A varactor diode may be incorporated into the tank circuit to provide a voltage variable input for the oscillator (VCO). Thi

文件：165.97 Kbytes 页数：14 Pages

ONSEMI

安森美半导体

5 V ECL Voltage Controlled Oscillator Amplifier

Description The MC100EL1648 is a voltage controlled oscillator amplifier that requires an external parallel tank circuit consisting of the inductor (L) and capacitor (C). A varactor diode may be incorporated into the tank circuit to provide a voltage variable input for the oscillator (VCO). Thi

文件：165.97 Kbytes 页数：14 Pages

ONSEMI

安森美半导体

5 V ECL Voltage Controlled Oscillator Amplifier

Description The MC100EL1648 is a voltage controlled oscillator amplifier that requires an external parallel tank circuit consisting of the inductor (L) and capacitor (C). A varactor diode may be incorporated into the tank circuit to provide a voltage variable input for the oscillator (VCO). Thi

文件：165.97 Kbytes 页数：14 Pages

ONSEMI

安森美半导体