Upstream CATV Driver Amplifier

General Description The MAX3532 is a programmable power amplifier for use in upstream cable applications. The device outputs up to 62dBmV (continuous wave) through a 1:2 (voltage ratio) transformer when driven with 36dBmV at its input. It features variable gain, which is controlled via a 3-wire d

文件：84.07 Kbytes 页数：8 Pages

MAXIM

美信

CATV上行驱动放大器

The MAX3532 is a programmable power amplifier for use in upstream cable applications. The device outputs up to 62dBmV (continuous wave) through a 1:2 (voltage ratio) transformer when driven with 36dBmV at its input. It features variable gain, which is controlled via a 3-wire digital serial bus and a \n• Single +5V Supply \n• Output Level Ranges from Less than 8dBmV to 62dBmV, in 1dB Steps \n• Gain Programmable in 1dB Steps \n• 350mW Typical Power Dissipation \n• Transmit-Disable Mode \n• Two Shutdown Modes;

ADI

亚德诺

Upstream CATV Driver Amplifier

General Description The MAX3532 is a programmable power amplifier for use in upstream cable applications. The device outputs up to 62dBmV (continuous wave) through a 1:2 (voltage ratio) transformer when driven with 36dBmV at its input. It features variable gain, which is controlled via a 3-wire d

文件：84.07 Kbytes 页数：8 Pages

MAXIM

美信

150mA LDO with output voltage switching function

文件：219.19 Kbytes 页数：16 Pages

MITSUMI

三美

Daughter Board for Gene Series

文件：117.2 Kbytes 页数：1 Pages

AAEON

研扬科技

IC for CMOS System Reset

文件：155.25 Kbytes 页数：20 Pages

MITSUMI

三美