LM5116中文资料6V 至 100V 宽输入电压、电流模式同步降压控制器数据手册TI规格书

描述 Description

The LM5116 is a synchronous buck controller intended for step-down regulator applications from a high-voltage or widely varying input supply. The control method is based upon current mode control utilizing an emulated current ramp. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting, and ease-of-loop compensation. The use of an emulated control ramp reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of very small duty cycles necessary in high-input voltage applications.

The operating frequency is programmable from 50 kHz to 1 MHz. The LM5116 drives external high-side and low-side NMOS power switches with adaptive dead-time control. A user-selectable diode emulation mode enables discontinuous mode operation, for improved efficiency at light load conditions. A low quiescent current shutdown disables the controller and consumes less than 10 µA of total input current.

Additional features include a high-voltage bias regulator, automatic switch-over to external bias for improved efficiency, thermal shutdown, frequency synchronization, cycle-by-cycle current limit, and adjustable line undervoltage lockout. The device is available in a power enhanced HTSSOP-20 package featuring an exposed die attach pad to aid thermal dissipation.

特性 Features

• Emulated Peak Current Mode
• Low IQ Shutdown (MOSFETs
• Free-run or Synchronous Operation to 1 MHz
• Programmable Output from 1.215 V to 80 V
• Programmable Current Limit
• Programmable Line Undervoltage Lockout
• HTSSOP-20 Exposed Pad
• Create a Custom Design Using the LM5116 with the WEBENCH Power Designer