L99MOD50XP数据手册集成电路（IC）的专用IC规格书PDF

描述 Description

The L99MOD50XP is a microcontroller-driven multifunctional actuator driver for automotive applications.

Up to five DC motors and five grounded resistive loads can be driven with six half bridges and five high-side drivers.

The integrated SPI controls all operating modes (forward, reverse, brake and high impedance).

Also all diagnostic information is available via SPI read.

特性 Features

• AEC-Q100 qualified
• Two half bridges for 6 A load (RDSon = 150 mΩ)
• Two half bridges for 3 A load (RDSon = 300 mΩ)
• Two half bridges for 0.75 A load (RDSon = 1600 mΩ)
• One high-side driver for 6 A load (RDSon = 90 mΩ)
• Two configurable high-side drivers for up to 1.5A load (RDSon = 500 mΩ) or 0.4 A load (RDSon = 1800 mΩ)
• Two high-side drivers for 0.5 A load (RDSon = 1600 mΩ)
• Programmable soft start function to drive loads with higher inrush currents as current limitation value
• Very low current consumption in standby mode (IS j ≤ 85 °C; ICCj ≤ 85 °C)
• Current monitor output for all high-side drivers
• Device contains temperature warning and protection
• Open-load detection for all outputs
• Over-current protection for all outputs
• PWM control of all outputs
• Charge pump output for reverse polarity protection
• ST standard serial peripheral interface (ST-SPI 3.0)

简介

L99MOD50XP属于集成电路（IC）的专用IC。由制造生产的L99MOD50XP专用 IC专用专用集成电路 (IC) 或芯片设计用于执行特定功能。这个类别包括可寻址开关、空芯仪表驱动器、音视频开关、验证芯片、自动放电、时钟发生器、彩色扫描仪，以及各种应用所用的其他许多集成电路。