L99MC6GJ数据手册ST中文资料规格书

描述 Description

The L99MC6GJ IC is a highly flexible monolithic medium current output driver that incorporates 3 dedicated low-side outputs (channels 4 to 6) and 3 independently self configuring outputs (channels 1 to 3) that can be used as either low-side or high-side drivers in any combination. The L99MC6GJ can control inductive loads, incandescent bulbs or LEDs.

The L99MC6GJ can be used in a half bridge configuration with crosscurrent protection.

The channel 2 can be controlled directly via the IN/PWM pin for PWM applications. The IN/PWM signal can be applied to any other output.

The integrated 16-bit standard serial peripheral interface (SPI) controls all outputs and provides diagnostic information: normal operation, open-load in off-state, overcurrent, temperature warning, overtemperature.

特性 Features

• AEC-Q100 qualified
• 3 independently self configuring high-/low-side channels
• 3 low-side channels
• RON = 0.7 Ω (typ) at Tj = 25 °C
• Current limit of each output at min. 0.6 A
• PWM direct mode
• Bulb mode with recovery mode
• LED mode with slew rate control
• Bridge mode with crosscurrent protection
• SPI interface for data communication
• Temperature warning
• All outputs overtemperature protected
• All outputs short-circuit protected
• Configurable open-load detection in off mode
• VCCsupply voltage 3.0 V to 5.25 V
• Very low current consumption in standby mode 5 μA (typ)
• Internal clamp diodes
• HS switches operate down to 3 V crank voltage