L9963E数据手册集成电路（IC）的电池管理规格书PDF

描述 Description

The L9963E is a Li-ion battery monitoring and protecting chip for high-reliability automotive applications and energy storage systems. Up to 14 stacked battery cells can be monitored to meet the requirements of 48 V and higher voltage systems.

Each cell voltage is measured with high accuracy, as well as the current for the on-chip coulomb counting. The device can monitor up to 7 NTCs. The information is transmitted through SPI communication or isolated interface.

Multiple L9963E can be connected in a daisy chain and communicate with one host processor via the transformer isolated interfaces, featuring high-speed, low EMI, long distance, and reliable data transmission.

Passive balancing with programmable channel selection is offered in both normal and low power mode (silent balance). The balancing can be terminated automatically based on internal timer interrupt. Nine GPIOs are integrated for external monitoring and controlling. The L9963E features a comprehensive set of fault detection and notification functions to meet the safety standard requirements.

特性 Features

• AEC-Q100 qualified
• Measures 4 to 14 cells in series, with 0 μs desynchronization delay between samples. Supports also busbar connection without altering cell results
• Coulomb counter supporting pack overcurrent detection in both ignition on and off states. Fully synchronized current and voltage samples
• 16-bit voltage ADC with maximum error of ±2 mV in the [0.5 – 4.3] V range, after soldering, in [-40; +105] °C Tj range
• 2.66 Mbps isolated serial communication with regenerative buffer, supporting dual access ring. Less than 4 us latency between start of conversion of the 1st and the 31st device in a chain. Less than 4 ms to convert and read 96 cells in a system using 8 L9963E and L9963T transceiver. Less than 8 ms to convert and read 210 cells in a system using 15 L9963E and L9963T transceiver. Less than 16 ms to convert and read 434 cells in a system using 31 L9963E and L9963T transceiver. Supports both XFMR and CAP based isolation
• 200 mA passive internal balancing current for each cell in both normal and silent-balancing mode. Possibility of executing cyclic wake up measurements. Manual/Timed balancing, on multiple channels simultaneously; Internal/External balancing
• Fully redundant cell measurement path, with ADC Swap, for enhanced safety and limp home functionality
• Intelligent diagnostic routine providing automatic failure validation. Redundant fault notification through both SPI Global Status Word (GSW) and dedicated FAULT line
• Two 5 V regulators supporting external load connection with 25 mA (VCOM) and 50 mA (VTREF) current capability
• 9 GPIOs, with up to 7 analog inputs for NTC sensing
• Robust hot-plug performance. No Zeners needed in parallel to each cell
• Full ISO26262 compliant, ASIL-D systems ready

简介

L9963E属于集成电路（IC）的电池管理。由制造生产的L9963E电池管理电池管理 PMIC（电源管理集成电路）系列产品可用于电池相关的监测和控制功能，包括身份验证、电池平衡、状态监测、电量计量、电源选择、短路保护、过压和欠压保护等等。请注意，虽然该系列中的某些产品可能包括电池充电功能，但将充电功能作为主要功能的产品是单独分类的。