L9954LXP中文资料特殊功能，车门模块驱动器数据手册ST规格书

描述 Description

The L9954LXP is a microcontroller driven multifunctional door actuator driver for automotive applications. Up to two DC motors and three grounded resistive loads can be driven with three half bridges and three high-side drivers. The integrated standard Serial Peripheral Interface (SPI) controls all operation modes (forward, reverse, brake and high impedance). All diagnostic informations are available via SPI.

特性 Features

• Overload diagnostic for all outputs
• Open-load diagnostic for all outputs
• Charge pump output for reverse polarity protection
• PWM control of all outputs
• Current monitor output for high-side OUT1, OUT4, OUT5 and OUT6
• All outputs short circuit protected
• Three half bridges for 0.75 A loads (RDSon = 1600 mΩ)
• One high-side driver for 6 A load (RDSon = 100 mΩ)
• Two configurable high-side driver for up to 1.5A load (RDSon = 500 mΩ) or 0.35 A load (Ron = 1800 mΩ)
• Very low current consumption in standby mode (IS < 6 μA typ; Tj = 85 °C)
• All outputs over temperature protected
• Programmable soft start function to drive loads with higher inrush currents (i.e. current > 6 A, current > 1.5 A)

简介

L9954LXP属于集成电路（IC）的电源管理-专用。由ST制造生产的L9954LXP电源管理 - 专用专用型电源管理集成电路 (PMIC) 用于电源的控制或操作，适合特定或小范围的目标应用，例如汽车气囊管理、电容器组平衡、AC 公共电力监控、存储器总线端接、接地故障检测、能量收集、小型引擎管理、处理器或芯片集专用电压调节、负载突降保护、触觉驱动器、热电制冷器控制等。