L9950XP中文资料车门致动器驱动器数据手册ST规格书

描述 Description

The L9950 and L9950XP are microcontroller driven multifunctional door actuator driver for automotive applications.Up to five DC motors and five grounded resistive loads can be driven with six half bridges and five highside drivers. The integrated standard serial peripheral interface (SPI) controls all operation modes (forward, reverse, brake and high impedance). All diagnostic informations are available via SPI.

特性 Features

• One full bridge for 6A load (Ron=150 mΩ )
• Two half bridges for 3A load (Ron=300 mΩ )
• Two half bridges for 1.5A load (Ron=800 mΩ )
• One highside driver for 6A load (Ron=100 mΩ )
• Four highside drivers for 1.5 A load (Ron=800 mΩ )
• Programmable softstart function to drive loads with higher inrush currents (i.e. current >6 A,>3 A,>1.5 A)
• Very low current consumption in standby mode (IS
• Current monitor output for 300 mΩ, 150 mΩ and 100 m highside drivers
• All outputs over temperature protected
• Open load diagnostic for all outputs
• Overload diagnostic for all outputs
• Seperated half bridges for door lock motor
• PWM control of all outputs
• Charge pump output for reverse polarity protection

简介

L9950XP属于集成电路（IC）的电源管理-专用。由制造生产的L9950XP电源管理 - 专用专用型电源管理集成电路 (PMIC) 用于电源的控制或操作，适合特定或小范围的目标应用，例如汽车气囊管理、电容器组平衡、AC 公共电力监控、存储器总线端接、接地故障检测、能量收集、小型引擎管理、处理器或芯片集专用电压调节、负载突降保护、触觉驱动器、热电制冷器控制等。