丝印：K248；Package：SOT23-5；High bandwidth (52 MHz), rail-to-rail output, 36 V op amp

Features • Low offset voltage: 3 mV max @ 25 °C • Low current consumption: 3.3 mA max / op @ 36 V • Wide supply voltage: 4.5 to 36 V • Gain bandwidth product: 52 MHz typ. @ 36 V • Unity gain stable • Rail-to-rail output • Output current: 40 mA typ. @ 36 V • Input common-mode voltage includ

文件：7.91277 Mbytes 页数：38 Pages

STMICROELECTRONICS

意法半导体

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：3.13075 Mbytes 页数：4 Pages

KG

SWITCHING N-CHANNEL POWER MOS FET INDUSTRIAL USE

SEMICONDUCTOR SELECTION GUIDE Microcomputer IC Memory Semi-Custom IC Particular Purpose IC General Purpose Linear IC Transistor / Diode / Thyristor Microwave Device / Consumer Use High Frequency Device Optical Device Packages Index (Quick Reference by Type N

文件：117.61 Kbytes 页数：8 Pages

NEC

瑞萨

SWITCHING N-CHANNEL POWER MOS FET INDUSTRIAL USE

SEMICONDUCTOR SELECTION GUIDE Microcomputer IC Memory Semi-Custom IC Particular Purpose IC General Purpose Linear IC Transistor / Diode / Thyristor Microwave Device / Consumer Use High Frequency Device Optical Device Packages Index (Quick Reference by Type N

文件：118.06 Kbytes 页数：8 Pages

NEC

瑞萨

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：3.13075 Mbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：3.13075 Mbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：3.13075 Mbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：3.13075 Mbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：3.13075 Mbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：3.13075 Mbytes 页数：4 Pages

KG