NXP Semiconductors MCIMX6QP-SDB SABRE Development Board
NXP Semiconductors MCIMX6QP-SDB SABRE (Smart Application Blueprint for Rapid Engineering) Board introduces developers to quad-core processing， low-power consumption， and_bleeding-edge multimedia and_graphics applications based on the i.MX 6QuadPlus Applications Processor. The MCIMX6QP-SDB SABRE Board provides a low-cost development platform which includes all primary features of the i.MX 6QuadPlus and_serves as an example for how to layout complex， high-speed interfaces such as DDR. The SABRE includes a pre-installed SD card with the Android operating system and_complete hardware design files. A number of accessory boards for the SABRE-SDB are also available to provide additional capabilities such as multi-touch display and_Wi-Fi? connectivity.
The MCIMX6QP-SDB SABRE Board includes an i.MX 6QuadPlus processor， and_can also be configured with the i.MX 6DualPlus Processor.
FEATURES
Processor: i.MX 6QuadPlus 1GHz processor based on the Arm Cortex-A9 core
Development for: i.MX 6QuadPlus and_i.MX 6DualPlus
Memory/Storage
1GB DDR3 SDRAM up to 533MHz (1066MTPS) memory
8GB eMMC flash
Display
2x LVDS connectors
HDMI connector
LCD expansion connector (parallel， 24-bit)
MIPI DSI connector (two data lanes， 1GHz each)
User Interface: Power， reset， volume buttons
Power Management: NXP MMPF0100 PMIC
Debug
JTAG connector (10-pin)
1x Serial-to-USB connector (for JTAG)
Audio
Audio codec
Microphone and_headphone jacks
Expansion Connector
Camera MIPI CSI port
I2C， SSI， SPI signals
Connectivity
2x Full-size SD/MMC card slots
22-pin SATA connector
10/100/1000 Ethernet port
1x USB 2.0 OTG port (micro USB)
mPCIe connector
OS Support
Linux and_Android
Others supported third party (QNX， Windows? Embedded)
Tools Support
Manufacturing Tool
Processor Expert IOMUX tool
Additional Features
NXP MMA8451 three-axis accelerometer
USB plug power supply
NXP 3D magnetometer
