DRV8231A中文资料具有电流调节和电流检测反馈的 33V H 桥电机驱动器数据手册TI规格书

描述 Description

The DRV8231A device is an integrated motor driver with N-channel H-bridge, charge pump, current sense feedback, current regulation, and protection circuitry. The charge pump improves efficiency by supporting N-channel MOSFET half bridges and 100% duty cycle driving.

An internal current mirror architecture on the IPROPI pin implements current sensing and regulation. This eliminates the need for a large power shunt resistor, saving board area and reducing system cost. The IPROPI current-sense output allows a microcontroller to detect motor stall or changes in load conditions. The external voltage reference pin, VREF, determines the threshold of current regulation during start-up and stall events without interaction from a microcontroller.

A low-power sleep mode achieves ultra-low quiescent current draw by shutting down most of the internal circuitry. Internal protection features include supply undervoltage lockout, output overcurrent, and device overtemperature.

The DRV8231A is part of a family of devices which come in pin-to-pin, scalable RDS(on) and supply voltage options to support various loads and supply rails with minimal design changes. See Section 5 for information on the devices in this family. View the full portfolio of brushed motor drivers on ti.com.

特性 Features

• N-channel H-bridge brushed DC motor driver
• Pin-to-pin, RDS(on), voltage, and current sense/regulation variants (external shunt resistor and integrated current mirror)
• DRV8251: 4.5-V to 48-V, 450-mΩ, shunt
• DRV8231: 4.5-V to 33-V, 600-mΩ, shunt
• High output current capability: 3.7-A Peak
• Supports 1.8-V, 3.3-V, and 5-V logic inputs
• Low-power sleep mode
• Small package and footprint
• 8-Pin HSOP with PowerPAD™, 4.9 × 6.0 mm
• Integrated protection features
• Auto-retry overcurrent protection (OCP)
• Thermal shutdown (TSD)