DRV8215数据手册TI中文资料规格书

描述 Description

The DRV8215 is a high-performance integrated H-bridge motor driver with integrated speed and voltage regulation along with additional integrated features like stall detection, current sense output, current regulation, and protection circuitry.

The integrated speed and voltage regulation feature uses the motor voltage and current information to regulate motor speed or voltage eliminating the potential need for external sensors to detect speed. This reduces board size and design complexity, and saves on overall system cost. Integrated speed regulation is used to maintain constant motor speed over varying input supply voltages which minimizes current consumption and saves power over time. This is critical in applications that have different loading conditions or rely on battery power for operation where the input voltage is not constant. Soft-start and stop allows for a controlled turn-on and turn-off time, reducing large inrush currents to protect the motor windings from damage, thereby increasing system reliability and longevity.

An internal current mirror implements current sensing and regulation. This eliminates the need for a large power shunt resistor, saving board area and reducing system cost. The IPROPI current sense output allows a microcontroller to detect motor stall or changes in load conditions. The gain select feature allows high accuracy current sensing down to 10mA average motor current. Using the VREF pin, this device can regulate the motor current during startup and high-load events without interaction from a microcontroller. The device supports sensorless motor stall detection and reporting to microcontroller.

特性 Features

N-channel H-bridge brushed DC motor driver

1.65-V to 11-V operating supply voltage range

Integrated Voltage and Speed regulation

Soft-Start and Stop feature for inrush current protection

240-mΩ RDS(on) (High-Side + Low-Side)

High output current capability: 4-A Peak, 2-A RMS

PWM with I2C control interface

Configuration and diagnostics on I2C registers

Multi-follower operation support

Supports standard and fast I2C mode



Supports 1.8-V, 3.3-V, and 5-V logic inputs

Integrated current sensing and current regulation

Analog current sense output (IPROPI)

Gain select feature for:

High accuracy current sensing down to 10 mA

Optimized RDS(ON) and overcurrent limit



Internal charge pump with 100% duty cycle

Long battery life with low-power sleep mode

< 100 nA maximum sleep current



Small package and footprint

16-Pin WQFN with PowerPAD™, 3 × 3 mm



Integrated protection features

VCC undervoltage lockout (UVLO)

Overcurrent protection (OCP)

Thermal shutdown (TSD)

Stall detection

Overvoltage protection (OVP)