SIL2 Load Cell/Strain Gauge Bridge Converter

FEATURES SIL 2 / SC 3 Strain Gauge Bridge Isolated Converter Up to four 350 Ω load cells in parallel 0/4-20 mA sink/source output current Modbus RTU RS-485 for monitor & configuration Field Automatic Calibration Fully programmable operating parameters High Accuracy, μP controlled A/D conve

文件：148.7 Kbytes 页数：2 Pages

GMI

SIL2 Load Cell/Strain Gauge Bridge Converter

FEATURES SIL 2 / SC 3 Strain Gauge Bridge Isolated Converter Up to four 350 Ω load cells in parallel 0/4-20 mA sink/source output current Modbus RTU RS-485 for monitor & configuration Field Automatic Calibration Fully programmable operating parameters High Accuracy, μP controlled A/D conve

文件：148.7 Kbytes 页数：2 Pages

GMI

SIL2 Temperature Converter & Trip Amplifier

FEATURES SIL 2 / SC 3 mV, TC, 2/3/4wire res./RTD or potentiometer input Two independent Trip Amplifiers (SPDT relay contacts) Inversion/scaling/custom output Selectable CJC: internal PT1000, external RTD or fixed Fastest integration time: 50 ms Burnout/internal/cjc/in sensor fault monitor

文件：147.71 Kbytes 页数：2 Pages

GMI

SIL2 Temperature Converter & Trip Amplifier

FEATURES SIL 2 / SC 3 mV, TC, 2/3/4wire res./RTD or potentiometer input Two independent Trip Amplifiers (SPDT relay contacts) Inversion/scaling/custom output Selectable CJC: internal PT1000, external RTD or fixed Fastest integration time: 50 ms Burnout/internal/cjc/in sensor fault monitor

文件：147.71 Kbytes 页数：2 Pages

GMI

4.6W DUAL AUDIO POWER AMPLIFIER

[Silicore] 4.6W DUAL AUDIO POWER AMPLIFIER

文件：310.32 Kbytes 页数：7 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

Fixed Inductors for Surface Mounting

Fixed Inductors for Surface Mounting Inductance Range:1.0～47µH(D62LCB), 1.0~82µH(D62CB), 1.0~150µH(D63LCB), 2.0~100µH(D63CB) FEATURES • Low profile (6.2×6.3mm Max. square, 2.0, 2.5, 3.0, and 3.5mm Max. height). • Magnetically shielded construction and low DC resistance. • Suitable

文件：97.29 Kbytes 页数：3 Pages

TOKO

1.25MHz, 2.2A Synchronous Step-Down Switcher

DESCRIPTION The MP2117 is an internally compensated 2.2A synchronous step-down switcher. The operating frequency is internally set at 1.25MHz. MP2117 is ideal for powering portable equipment that runs from a single cell Lithium-Ion (Li+) Battery. The MP2117 can provide up to 2.2A continuous

文件：779.9 Kbytes 页数：12 Pages

MPS

美国芯源

Netz-Gleichrichterdiode Rectifier Diode

文件：186.35 Kbytes 页数：7 Pages

INFINEON

英飞凌

4.6W Dual Audio Power Amplifier

文件：119.86 Kbytes 页数：6 Pages

YONGFUKANG

永福康

Fixed Inductors for Surface Mounting

文件：177.16 Kbytes 页数：3 Pages

TOKO