SIL2 2/4-Wire Transmitter Power Supply

FEATURES SIL 2 / SC 3 (pending) 0/4-20 mA Active-Passive Input, Source Output Duplication/inversion/scaling output Input operations (sum, dif, max, min) available Input and Output short circuit proof Out of range fault detection Alarm output with user-settable trip points Modbus RTU RS-485

文件：161.32 Kbytes 页数：2 Pages

GMI

SIL2 Switch/Proximity O.C.-Out Repeater

FEATURES SIL 2 / SC 3 Field open and short circuit detection Input muxing/duplication/inversion/operations available Modbus RTU RS-485 for monitor & configuration Fully programmable operating parameters Three port isolation, Input/Output/Supply High Density, eight channels per unit

文件：168.77 Kbytes 页数：2 Pages

GMI

SIL2 Switch/Proximity O.C.-Out Repeater

FEATURES SIL 2 / SC 3 Field open and short circuit detection Input muxing/duplication/inversion/operations available Modbus RTU RS-485 for monitor & configuration Fully programmable operating parameters Three port isolation, Input/Output/Supply High Density, eight channels per unit

文件：168.77 Kbytes 页数：2 Pages

GMI

SIL2 2/4-Wire Transmitter Trip Amplifier

FEATURES SIL 2 / SC 3 ±12 V Voltage Input 0/4-20 mA Active-Passive Input, Source-Sink Output Input and Output short circuit proof Modbus RTU RS-485 for monitor & configuration Out-of-range fault detection Optional alarm acknowledgement input Fully programmable operating parameters High Ac

文件：151.54 Kbytes 页数：2 Pages

GMI

SIL2 2/4-Wire Transmitter Trip Amplifier

FEATURES SIL 2 / SC 3 ±12 V Voltage Input 0/4-20 mA Active-Passive Input, Source-Sink Output Input and Output short circuit proof Modbus RTU RS-485 for monitor & configuration Out-of-range fault detection Optional alarm acknowledgement input Fully programmable operating parameters High Ac

文件：151.54 Kbytes 页数：2 Pages

GMI

D Series - Standard D Shells

Features: • Top or side knockout cable entry. • Two long finger jack screws (59mm). • Two short jack screws (13mm). • 4/40 UNC jack screw thread. • Side cable entry only suitable with short jack screws. • Flame retardant ABS. • Nickel plated steel screws and clamp. • Two countersunk fixing

文件：310.68 Kbytes 页数：7 Pages

MULTICOMP

易络盟

D Series - Standard D Shells

Features: • Top or side knockout cable entry. • Two long finger jack screws (59mm). • Two short jack screws (13mm). • 4/40 UNC jack screw thread. • Side cable entry only suitable with short jack screws. • Flame retardant ABS. • Nickel plated steel screws and clamp. • Two countersunk fixing

文件：310.68 Kbytes 页数：7 Pages

MULTICOMP

易络盟

D Series - Standard D Shells

Features: • Top or side knockout cable entry. • Two long finger jack screws (59mm). • Two short jack screws (13mm). • 4/40 UNC jack screw thread. • Side cable entry only suitable with short jack screws. • Flame retardant ABS. • Nickel plated steel screws and clamp. • Two countersunk fixing

文件：310.68 Kbytes 页数：7 Pages

MULTICOMP

易络盟

SIL2 Load Cell/Strain Gauge Bridge Repeater

FEATURES SIL 2 / SC 3 Strain Gauge Bridge Transparent Repeater Up to four 350 Ω load cells in parallel High Accuracy Three port isolation, Input/Output/Supply

文件：137.9 Kbytes 页数：2 Pages

GMI

SIL2 Load Cell/Strain Gauge Bridge Repeater

FEATURES SIL 2 / SC 3 Strain Gauge Bridge Transparent Repeater Up to four 350 Ω load cells in parallel High Accuracy Three port isolation, Input/Output/Supply

文件：137.9 Kbytes 页数：2 Pages

GMI