I.S. SIL2 Load Cell/Strain Gauge Bridge Converter

FEATURES SIL 2 / SC 3 Input from Zone 0 Installation in Zone 2 Strain Gauge Bridge Isolated Converter Up to four 350 Ω load cells in parallel 0/4-20 mA sink/source output current Modbus RTU RS-485 for monitor & configuration Field Automatic Calibration Fully programmable operating paramet

文件：151.63 Kbytes 页数：2 Pages

GMI

I.S. SIL2 Temperature Converter & Trip Amplifier

FEATURES SIL 2 / SC 3 Input from Zone 0/Div. 1 Installation in Zone 2/Div. 2 mV, TC, 2/3/4wire res./RTD or potentiometer input Two independent Trip Amplifiers (SPDT relay contacts) Inversion/scaling/custom output Selectable CJC: internal PT1000, external RTD or fixed Fastest integration ti

文件：151.23 Kbytes 页数：2 Pages

GMI

I.S. SIL2 Temperature Converter & Trip Amplifier

FEATURES SIL 2 / SC 3 Input from Zone 0/Div. 1 Installation in Zone 2/Div. 2 mV, TC, 2/3/4wire res./RTD or potentiometer input Two independent Trip Amplifiers (SPDT relay contacts) Inversion/scaling/custom output Selectable CJC: internal PT1000, external RTD or fixed Fastest integration ti

文件：151.23 Kbytes 页数：2 Pages

GMI

SIL3 Relay Out Module for 10 A NE Loads

FEATURES SIL 3 / SC 3 for NE loads with NE driver Installation in Zone 2/Div. 2 Up to 10 A functional / 16 A inrush current Load disconnection on both supply lines available Compatible with DCS/PLC pulse testing Service contact available Input/Output isolation

文件：134.07 Kbytes 页数：2 Pages

GMI

SIL3 Relay Out Module for 10 A NE Loads

FEATURES SIL 3 / SC 3 for NE loads with NE driver Installation in Zone 2/Div. 2 Up to 10 A functional / 16 A inrush current Load disconnection on both supply lines available Compatible with DCS/PLC pulse testing Service contact available Input/Output isolation

文件：134.07 Kbytes 页数：2 Pages

GMI

SIL3 Relay Out Module for 10 A ND Loads

FEATURES SIL 3 / SC 3 for ND loads with ND/NE driver Installation in Zone 2/Div. 2 Up to 10 A functional / 16 A inrush current Compatible with DCS/PLC pulse testing Service contact available Input/Output isolation

文件：148.27 Kbytes 页数：2 Pages

GMI

SIL3 Relay Out Module for 10 A ND Loads

FEATURES SIL 3 / SC 3 for ND loads with ND/NE driver Installation in Zone 2/Div. 2 Up to 10 A functional / 16 A inrush current Compatible with DCS/PLC pulse testing Service contact available Input/Output isolation

文件：148.27 Kbytes 页数：2 Pages

GMI

SIL3 Relay Out Module for 5 A NE Loads with LFD

FEATURES SIL 3 / SC 3 for NE loads with NE driver SIL 2 / SC 3 for FAULT OUTPUTS Installation in Zone 2/Div. 2 Up to 5 A functional / 6 A inrush current Load disconnection on both supply lines available Compatible with DCS/PLC pulse testing Line & Load short/open circuit detection Load vol

文件：151.74 Kbytes 页数：2 Pages

GMI

SIL3 Relay Out Module for 5 A NE Loads with LFD

FEATURES SIL 3 / SC 3 for NE loads with NE driver SIL 2 / SC 3 for FAULT OUTPUTS Installation in Zone 2/Div. 2 Up to 5 A functional / 6 A inrush current Load disconnection on both supply lines available Compatible with DCS/PLC pulse testing Line & Load short/open circuit detection Load vol

文件：151.74 Kbytes 页数：2 Pages

GMI

SIL3 Relay Out Module for 5 A NE/ND Loads with LFD

FEATURES SIL 3 / SC 3 for NE/ND loads with NE/ND driver SIL 2 / SC 3 for FAULT OUTPUTS Installation in Zone 2/Div. 2 Up to 5 A functional / 6 A inrush current Load disconnection on both supply lines available High process availability to avoid spurious trips Compatible with DCS/PLC pulse te

文件：153.19 Kbytes 页数：2 Pages

GMI