Diagnostic Module for DIN-Rail

FEATURES Simplified bus fault acquisition

文件：122.84 Kbytes 页数：2 Pages

GMI

Diagnostic Module for DIN-Rail

FEATURES Simplified bus fault acquisition

文件：122.84 Kbytes 页数：2 Pages

GMI

1.6MHz Synchronous Step-Down plus 200mA LDO

DESCRIPTION The MP2101 is an internally compensated 1.6MHz fixed-frequency PWM step-down switcher with a 200mA low dropout (LDO) linear regulator. It is ideal for portable equipment powered by a single cell Lithium-Ion (Li+) Battery. The MP2101 can provide 800mA and 200mA of load current from a 2

文件：469.17 Kbytes 页数：12 Pages

MPS

美国芯源

I.S. SIL2 Switch/Proximity O.C.-Out Repeater

FEATURES SIL 2 / SC 3 Input from Zone 0/Div. 1 Installation in Zone 2/Div. 2 Field open and short circuit detection Input muxing/duplication/inversion/operations available Modbus RTU RS-485 for monitor & configuration Fully programmable operating parameters Three port isolation, Input/Outp

文件：172.27 Kbytes 页数：2 Pages

GMI

I.S. SIL2 Switch/Proximity O.C.-Out Repeater

FEATURES SIL 2 / SC 3 Input from Zone 0/Div. 1 Installation in Zone 2/Div. 2 Field open and short circuit detection Input muxing/duplication/inversion/operations available Modbus RTU RS-485 for monitor & configuration Fully programmable operating parameters Three port isolation, Input/Outp

文件：172.27 Kbytes 页数：2 Pages

GMI

I.S. SIL2 Bus-Powered Digital Output Driver

FEATURES SIL 2 / SC 3 Output to Zone 0 Installation in Zone 2 Bus powered for NE loads Output short circuit proof Modbus RTU RS-485 for monitor & configuration Fully programmable operating parameters Three port isolation, Input/Output/Supply High Density, three channels per unit

文件：159.27 Kbytes 页数：2 Pages

GMI

I.S. SIL2 Bus-Powered Digital Output Driver

FEATURES SIL 2 / SC 3 Output to Zone 0 Installation in Zone 2 Bus powered for NE loads Output short circuit proof Modbus RTU RS-485 for monitor & configuration Fully programmable operating parameters Three port isolation, Input/Output/Supply High Density, three channels per unit

文件：159.27 Kbytes 页数：2 Pages

GMI

I.S. SIL2/3 Loop-Powered Digital Relay Output

FEATURES SIL 2 / SC 3 Output to Zone 0 Installation in Zone 2 2 fully independent channels Voltage level input Two SPDT Relay Output Signals Two port isolation, Input/Output/Supply High Reliability, SMD components High Density, two channels per unit

文件：142.68 Kbytes 页数：2 Pages

GMI

I.S. SIL2/3 Loop-Powered Digital Relay Output

FEATURES SIL 2 / SC 3 Output to Zone 0 Installation in Zone 2 2 fully independent channels Voltage level input Two SPDT Relay Output Signals Two port isolation, Input/Output/Supply High Reliability, SMD components High Density, two channels per unit

文件：142.68 Kbytes 页数：2 Pages

GMI

I.S. SIL2/3 Loop-Powered Digital Relay Output

FEATURES SIL 2 / SC 3 Output to Zone 0 Installation in Zone 2 2 fully independent channels Voltage level input Two SPDT Relay Output Signals Two port isolation, Input/Output/Supply High Reliability, SMD components High Density, two channels per unit

文件：142.68 Kbytes 页数：2 Pages

GMI