丝印：CD74HCT10E；Package：PDIP；CDx4HCT10 Triple 3-Input NAND Gates

1 Features • LSTTL input logic compatible – VIL(max) = 0.8 V, VIH(min) = 2 V • CMOS input logic compatible – II ≤ 1 μA at VOL, VOH • Buffered inputs • 4.5 V to 5.5 V operation • Wide operating temperature range: -55°C to +125°C • Supports fanout up to 10 LSTTL loads • Significant power r

文件：1.13946 Mbytes 页数：27 Pages

TI

德州仪器

丝印：CD74HCT10E；Package：PDIP；CDx4HCT10 Triple 3-Input NAND Gates

1 Features • LSTTL input logic compatible – VIL(max) = 0.8 V, VIH(min) = 2 V • CMOS input logic compatible – II ≤ 1 μA at VOL, VOH • Buffered inputs • 4.5 V to 5.5 V operation • Wide operating temperature range: -55°C to +125°C • Supports fanout up to 10 LSTTL loads • Significant power r

文件：1.13946 Mbytes 页数：27 Pages

TI

德州仪器

具有 TTL 兼容型 CMOS 输入的 3 通道、3 输入、4.5V 至 5.5V 与非门

This device contains three independent 3-input NAND gates. Each gate performs the Boolean function Y =  A ● B ● C in positive logic. • LSTTL input logic compatible \n• CMOS input logic compatible \n• Buffered inputs\n• Wide operating temperature range: -55°C to +125°C\n• Significant power reduction compared to LSTTL logic ICs;

TI

德州仪器

Dual J-K Flip-Flop with Reset Negative-Edge Trigger

Features • Hysteresis on Clock Inputs for Improved Noise Immunity and Increased Input Rise and Fall Times • Asynchronous Reset • Complementary Outputs • Buffered Inputs • Typical fMAX = 60MHz at VCC = 5V, CL = 15pF, TA = 25oC • Fanout (Over Temperature Range) - Standard Outputs . . . . .

文件：609.54 Kbytes 页数：20 Pages

TI

德州仪器

Dual J-K Flip-Flop with Set and Reset Positive-Edge Trigger

Features • Asynchronous Set and Reset • Schmitt Trigger Clock Inputs • Typical fMAX = 54MHz at VCC = 5V, CL = 15pF, TA = 25oC • Fanout (Over Temperature Range) - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads - Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads • Wi

文件：367.45 Kbytes 页数：16 Pages

TI

德州仪器

丝印：HCT109M；Package：SOIC；Dual J-K Flip-Flop with Set and Reset Positive-Edge Trigger

Features • Asynchronous Set and Reset • Schmitt Trigger Clock Inputs • Typical fMAX = 54MHz at VCC = 5V, CL = 15pF, TA = 25oC • Fanout (Over Temperature Range) - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads - Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads • Wi

文件：367.45 Kbytes 页数：16 Pages

TI

德州仪器

丝印：HCT109M；Package：SOIC；Dual J-K Flip-Flop with Set and Reset Positive-Edge Trigger

Features • Asynchronous Set and Reset • Schmitt Trigger Clock Inputs • Typical fMAX = 54MHz at VCC = 5V, CL = 15pF, TA = 25oC • Fanout (Over Temperature Range) - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads - Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads • Wi

文件：367.45 Kbytes 页数：16 Pages

TI

德州仪器

丝印：HCT109M；Package：SOIC；Dual J-K Flip-Flop with Set and Reset Positive-Edge Trigger

Features • Asynchronous Set and Reset • Schmitt Trigger Clock Inputs • Typical fMAX = 54MHz at VCC = 5V, CL = 15pF, TA = 25oC • Fanout (Over Temperature Range) - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads - Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads • Wi

文件：367.45 Kbytes 页数：16 Pages

TI

德州仪器

Dual J-K Flip-Flop with Set and Reset Positive-Edge Trigger

Features • Asynchronous Set and Reset • Schmitt Trigger Clock Inputs • Typical fMAX = 54MHz at VCC = 5V, CL = 15pF, TA = 25oC • Fanout (Over Temperature Range) - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads - Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads • Wi

文件：367.45 Kbytes 页数：16 Pages

TI

德州仪器

丝印：HCT10M；Package：SOIC；CDx4HCT10 Triple 3-Input NAND Gates

1 Features • LSTTL input logic compatible – VIL(max) = 0.8 V, VIH(min) = 2 V • CMOS input logic compatible – II ≤ 1 μA at VOL, VOH • Buffered inputs • 4.5 V to 5.5 V operation • Wide operating temperature range: -55°C to +125°C • Supports fanout up to 10 LSTTL loads • Significant power r

文件：1.13946 Mbytes 页数：27 Pages

TI

德州仪器