CC2652P中文资料具有集成式功率放大器的 SimpleLink™ Arm Cortex-M4F 多协议 2.4GHz 无线 MCU数据手册TI规格书

描述 Description

The SimpleLink™CC2652P device is a multiprotocol 2.4 GHz wireless microcontroller (MCU) supporting Thread,Zigbee , Bluetooth5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems, including the TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The device is optimized for low-power wireless communication and advanced sensing in building security systems, HVAC, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include:Wide flexibility of protocol stack support in the SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK). Enable long-range and low-power applications using integrated +20 dBm high-power amplifier with best-in-class transmit current consumption at 85 mA. Coin-cell operation at +10 dBm with transmit current consumption of 22 mA. Longer battery life wireless applications with low standby current of 0.94 µA with full RAM retention. Industrial temperature ready with lowest standby current of 5 µA at 85°C. Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1 µA system current. Low SER (Soft Error Rate) FIT (Failure-in-time) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events. Dedicated software controlled radio controller (Arm® Cortex®-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards. Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth ® Low Energy (-105 dBm for 125-kbps LE Coded PHY).

The CC2652P device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.

特性 Features

• Microcontroller
• EEMBC CoreMark score: 148
• 256KB of ROM for protocols and library functions
• 80KB of ultra-low leakage SRAM. The SRAM is protected by parity to ensure high reliability of operation.
• Supports over-the-air (OTA) update
• Ultra-low power sensor controller with 4KB of SRAM
• Operation independent from system CPU
• TI-RTOS, drivers, bootloader, Bluetooth 5.2 low energy controller, and IEEE 802.15.4 MAC in ROM for optimized application size
• 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
• Peripherals
• 4× 32-bit or 8× 16-bit general-purpose timers
• 2× comparators with internal reference DAC (1× continuous time, 1× ultra-low power)
• 2× UART
• I2C and I2S
• AES 128- and 256-bit cryptographic accelerator
• SHA2 accelerator (full suite up to SHA-512)
• Capacitive sensing, up to 8 channels
• External system
• Low power
• Active mode TX 0 dBm: 7.3 mA
• Active mode TX at +10 dBm: 22 mA
• Active mode MCU 48 MHz (CoreMark): 3.4 mA (71 µA/MHz)
• Sensor controller, active mode, 24 MHz, running infinite loop: 808 µA
• Shutdown: 150 nA (wakeup on external events)
• Radio section
• 3-wire, 2-wire, 1-wire PTA coexistence mechanisms
• Output power up to +20 dBm with temperature compensation
• EN 300 328, (Europe)
• FCC CFR47 Part 15
• Wireless protocols
• Development Tools and Software
• SmartRF™ Studio for simple radio configuration
• Sensor Controller Studio for building low-power sensing applications